Hi, Thanks for the feedback! :D I wouldn't charge for such a thing. You can do those changes with simple tools. If the electronics are your concern, just search for a "5v red led strip" on aliexpress or something, cut to size and it's done. They are quite cheap. Edit: For some reason all my imgur pi...

Hi all, I have decided to build an acrylic case to display the GameBoy while I don't play instead of having it closed on a bag somewhere. Such a beauty! :D https://i.imgur.com/apE63LP.jpg I bought my case from Sora-Shop (EU) I went for custom made size since all the available options i found weren't...

Very nice, reminds me of my first build. I used a cut down RP 3B+ and a waveshare 3.5in HDMI screen. It all worked, which was great. I found that the Waveshare HDMi has some Screen-Tearing, its not completely bad, but annoying, have use noticed this? Hi, Indeed i can confirm that is the only bad th...

Ziploc99 wrote: ↑

Mon Aug 24, 2020 1:28 pm

Really like this build. Well done. Feels good when it finally works the way you intended. How do you like those shoulder buttons?

Hi,

Thanks!
They are quite nice and fit nice in the case too. The smaller buttons are in the most comfortable position but the space is limited. :b

Hi all, Only recently i implemented all the features i wanted for this build so now I've decided to share it with you guys. :D It will not be a in depth guide as i don't have enough material to provide a useful guide. Also a big thanks for the support i got and for the huge knowledge base i found he...

Hi all, Just leaving a correction for the original game boy headphone jack. The only points that have continuity are Pin 3 and 4. The + output from the amp or from the volume pot should go Pin 2,3 and 5. When Headphones are plugged in connection between Pin 3 and 4 breaks and only headphones get sou...

Hi guys, Recently i took another try at it with a fresh image. At the start i was not getting it to work but after following the steps from Raccoon reply on another post it worked!! It has to do with python3. i will leave is comment below. Thanks! "Guys, For those who are working on RPI 3A+ Retropie...

Hi again, turning on the debug feature didn´t work, also tried messing with x,y but also no luck. Ended improving my screen in process by tweaking a few settings and installed OneForAll script which worked but the icon is so small (i´m using 1280*960), a battle for another day. eheh I also looked a ...

Hi! That was a fast reply! running "sudo i2cdetect -y 1" at the command line should tell you if the ads is working. you should get like a grid of lines, with a "48" in the middle. i forget exactly where, like 40/b or something. it should look similar to this: https://learn.adafruit.com/adafruits-ras...

Hi all! My setup is not really a pi zero build but i couldn´t find any other section taht this topic would fit. I´ve built a Raspberry Pi 3 B+ on classic gameboy shell. i use Arduino Pro MIcro for the Controller. For Power and Safe Shutdown i got a TinkerBoy PowerSwitch. For Battery monitoring i got...