Me likes

RE: Diagonal not working: I hit the same issue on mine, the issue is that the PLASTIC DPAD is not a very good clone.. if you cut two disks of paper and put it between the DPAD PLASTIC and the MEMBRANE it will fix it! The issue is that the 'nub' on the plastic DPAD is too tall.. so by putting someth...

Windows 10 is something I don't have experience using to program the boards and therefore don't really know if it got programmed properly or not. If you have access to a Windows 7 pc to reprogram the board try that as that is what I use. Do you have controls at all? yes the 4 ways are okay, but the...

Controller Issues can be fixed with a reprogram or better membranes (usually original ones), the first USBasp you linked to looks fine but be sure it's jumper is set to 5v. The sound having static is because of lack of shielding, you need to keep any power wires and data wires away from the amp and...

My very first console was the Atari 2600 and the first game I had was.. http://retroasylum.com/wp-content/uploads/2014/03/jungle.jpg Then I have very fond memories of the Atari Lynx.. I had a lot of games.. Toki, California Games, Gates of Zendocon..... ahhh... and then all the Game Boy family :)

Shielding also the pot wires did the trick thanks :) any pics to show what you did.... At the moment I can't open the GBZ, but basically I wired one of the GPIO ground holes in the RPi zero and then wrapped it around the 5 wires that go from the AIO Board to the Volume wheel. The other end of this ...

Controller Issues can be fixed with a reprogram or better membranes (usually original ones), the first USBasp you linked to looks fine but be sure it's jumper is set to 5v. The sound having static is because of lack of shielding, you need to keep any power wires and data wires away from the amp and...

Hello Helder, first of all, thanks for the boards, they arrived finally (Italian post system.. meh..). I assembled the GBZ following the wiring schematics and you can find some pictures here: http://imgur.com/a/huOMb , if you need closer ones let me know I am running into some issues.. mainly with t...

WOW! £15 (nearly) for 4 packs of wintergreen! yowzaaa! https://www.amazon.co.uk/Altoids-Wintergreen-50-Pack/dp/B006GC43KO/ref=sr_1_cc_5_a_it?s=aps&ie=UTF8&qid=1492604370&sr=1-5-catcorr&keywords=altoids shame only regular peppermint is sold natively here. all the other flavours are imports :( @wermy...

Lid/screen model: 89.5mm x 55mm x 6.3mm, with a corner radius of 14.9mm Bottom: 91.5mm x 57.5mm x 13.55mm, with a corner radius of 12.5mm (outer measurements taken with a ruler, not a caliper...) UK altoids: lid: 94mm x 59mm x 8mm (all slightly bigger) corner radius 13.5/14mm base: (inner measure o...