I'm borrowing the thread a bit, hope it's ok.
So I have this board and flashed it once. Everything seemed fine but controllers didn't work once I added it to the build.
Now I want to try to re-flash it just to narrow down possible issues but I can't get it recognized in the port section.
I'm on Mac and using Arduino 1.6.5.
Setting it as Arduino Leonardo and in Ports/Coms, nothing.
What am I doing wrong? When I try to flash it without setting a port I get this:
Board at /dev/cu.usbmodem1411 is not available
Some HELP with programming an Atmega32U4 with ISP
-
- Posts: 53
- Joined: Wed Jun 08, 2016 5:43 am
- Location: Sweden
- Has thanked: 1 time
- Been thanked: 2 times
Re: Some HELP with programming an Atmega32U4 with ISP
Poppy McDoh! wrote:now i loaded the sparkfun pro micro settings in arduino ide and flashed my code to the chip. it works. but somehow the button allocation is not what i want to send. for example receiving "11" and "12" in windows/gamecontrollersettings when pressing BTN_TURBO or BTN_SLOW does not work at all!
any idea for this? here are the windows gamecontroller values i want to receive when pressing the different buttons. up, down, left, right works fine at the right pins! the other pins are mixed or do not work
##########
update:
solved by changing whole pin layout and mapping.
Hi there, i've got one of those blue arduino pro micro clones bought from aliexpress, i think it's supposed to be the same as the sparkfun. what is the code you finally flashed and with what program version etc?
thanks a lot!!!
Re: Some HELP with programming an Atmega32U4 with ISP
If it can be of any assistance.
I typically use avrdude to flash my chips, and make to compile the hex
Public GitHub
The README.md has been updated.
TL;DR
I typically use avrdude to flash my chips, and make to compile the hex
Public GitHub
The README.md has been updated.
TL;DR
Code: Select all
$ make && make clean && make program
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: Some HELP with programming an Atmega32U4 with ISP
I got away from those crystals and use a resonator with built in filter caps.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest