Hey guys; just trying to verify some info. I'm looking for the exact diameter of the DMG 01 A and B buttons. I've searched over this forum and found some conflicting information; from 10.05 mm to 10.5mm to 10.8mm.
Just trying to figure out exactly how big I need to make my holes to add my X and Y buttons.
Gameboy Button dimensions?
Re: Gameboy Button dimensions?
I only have a ruler at hand, so I cant measure .1mms, sorry. However, the holes need to be slightly larger anyways, and I think most people go with 11mm holes and it works out just fine! Are you using a Dremel or a Drill?
I used to be an adventurer like you, but then I took an arrow in the knee :-O
Link: Downmix your GBZs sound to mono or you're missing half the fidelity!
Link: Downmix your GBZs sound to mono or you're missing half the fidelity!
- VeteranGamer
- Posts: 1738
- Joined: Thu Jan 26, 2017 11:12 am
- Location: London, UK
- Has thanked: 528 times
- Been thanked: 909 times
Re: Gameboy Button dimensions?
fsatatkid wrote: ↑Mon Sep 04, 2017 7:53 pmHey guys; just trying to verify some info. I'm looking for the exact diameter of the DMG 01 A and B buttons. I've searched over this forum and found some conflicting information; from 10.05 mm to 10.5mm to 10.8mm.
Just trying to figure out exactly how big I need to make my holes to add my X and Y buttons.
get one of these....
https://www.aliexpress.com/item/Xcan-Ho ... st=ae803_1
drill up to 10 (10mm) and you should be fine......
- 144TECH
- Posts: 325
- Joined: Fri Jan 06, 2017 7:30 am
- Location: Amsterdam
- Has thanked: 256 times
- Been thanked: 71 times
Re: Gameboy Button dimensions?
10.8mm , 11mm drill , play= 0.1 around the hole (measured digital)fsatatkid wrote: ↑Mon Sep 04, 2017 7:53 pmHey guys; just trying to verify some info. I'm looking for the exact diameter of the DMG 01 A and B buttons. I've searched over this forum and found some conflicting information; from 10.05 mm to 10.5mm to 10.8mm.
Just trying to figure out exactly how big I need to make my holes to add my X and Y buttons.
* Very Rare * GBZ 640x480 v3 Stock Looks 6000MAH
http://www.sudomod.com/forum/viewtopic.php?f=43&t=4863
http://www.sudomod.com/forum/viewtopic.php?f=43&t=4863
Re: Gameboy Button dimensions?
That's actually the exact one I have! I was just trying to make sure if I went 11mm it would do the trick.VeteranGamer wrote: ↑Tue Sep 05, 2017 2:30 pm
get one of these....
https://www.aliexpress.com/item/Xcan-Ho ... st=ae803_1
drill up to 10 (10mm) and you should be fine......
Who is online
Users browsing this forum: No registered users and 1 guest