Page 1 of 1

[FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace

Posted: Sat Sep 24, 2016 10:05 pm
by wermy
power_switch_brace_1.jpg
power_switch_brace_1.jpg (244.81 KiB) Viewed 10534 times
This 3D-Printed part makes it much easier to mount your power switch (as shown in part 2 of the all-custom-and-aftermarket-part build guide: sudomod.com/game-boy-zero-custom-parts-guide-part-2
It can be used with the aftermarket switched used in the above guide, as well as the original DMG switch. You just glue it in place (with the wider edge facing the right), and glue your switch down between the two ridges! You don't need much glue at all this way, so it's much cleaner.
power_switch_brace_2.jpg
power_switch_brace_2.jpg (234.22 KiB) Viewed 10534 times
Be sure to watch the video guide to more clearly see how to install it!

https://www.youtube.com/watch?v=eM3eNAOCphk

Get it on the market!
http://market.sudomod.com/3d-printed-power-switch-brace

STL file for printing your own can be downloaded here: http://sudomod.com/wp-content/uploads/2 ... e.stl_.zip

Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace

Posted: Fri Sep 30, 2016 4:17 pm
by sokignano
Just got mine in! You guys have to stop making cool additions to the GBZ or I will never get mine started lol

Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace

Posted: Fri Sep 30, 2016 7:16 pm
by tlxxxsracer
Can this be used with the safe shutdown pcb/switch?

Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace

Posted: Sat Oct 01, 2016 8:59 am
by wermy
tlxxxsracer wrote:Can this be used with the safe shutdown pcb/switch?
Not sure yet! I should be getting mine any day now, and that's the first thing I'll check. :)

Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace

Posted: Sat Oct 01, 2016 1:25 pm
by Ganreizu
wermy wrote:Not sure yet! I should be getting mine any day now, and that's the first thing I'll check. :)
Good to see confirmation that someone in the states hasn't gotten their shipment yet either. I just checked the mail and was starting to get worried since i'm on the east coast and should therefore take a short amount of time to get here. :/

Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace

Posted: Sun Oct 02, 2016 10:11 am
by johnny-bert
Nice addition, wermy!
Thank you for your work.

Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace

Posted: Wed Nov 02, 2016 3:58 am
by nirvanachild
Hi Wermy,

Do you know if the switch brace works with the safe shutdown pcb by Camble ?