Alright, so I took the schematics for the 2.4" screen, made a quick mockup model of it, and printed it out:
![IMG_2615.JPG](./download/file.php?id=5006&sid=16f11cee775fc71a20514724d94b1a66)
- IMG_2615.JPG (486.48 KiB) Viewed 9868 times
You could probably get it to fit, but just barely and the screw holes wouldn't be symmetrical, and the screen would be off-center. :\
Helder and I are looking into the option of using the bare screen (which are still widely available and would easily fit in the center of the case), combined with a tiny custom PCB. That would let us use the 2.4" screen (so a nice bump in size) with a ribbon cable that would connect it to the button PCB we're making, which is connected to the Pi. So it should be very clean and easy.
![Smile :)](./images/smilies/icon_e_smile.gif)
The only downside is that it will take a little longer to get all this ready. We have some screens on the way and have reached out to a supplier for a quote on buying some screens.