mintyPi 2.0 News & Updates

[SumCanadianGuy]

Wermy, How much longer until a guide? I want to build this SOOOOO much

Trust me, I want to get it all finished and out there asap.

What I'm waiting on currently:

• Screws to arrive from china
• Finishing printing pre-orders (I've got 3 printers going 24/7 for these - even running home during my lunch break to switch prints out when I can)
• Final, non-prototype parts from Helder to do the guide with

We'll keep everyone updated, I promise.

Shoot me a pm if you need help with printing parts. I have 3 printers as well and since the stupid spinner phase is over they aren't doing much lol.

[AndriodFan]

Hi Wermy!! I am a really big fan of 3d printing and rasberry pi. I wanted to know the part total minus the rasberry pi, 3d prints, ds lite buttons, and the charger and battery. Thanks.

[wermy]

Added a small update.

Hi Wermy!! I am a really big fan of 3d printing and rasberry pi. I wanted to know the part total minus the rasberry pi, 3d prints, ds lite buttons, and the charger and battery. Thanks.

Part list is up on the wiki (sudomod.com/wiki) - the total depends where you live and where you buy things.

[EemsRoro]

6-23
...(the final parts are slightly different [they have some test pads that people can use to make sure their soldering is correct, for example]

Parts list, software used and FAQs are here:
http://www.sudomod.com/wiki/index.php?title=MintyPi

I'm new to this whole world of modding but this forum is outstanding and this DIY, I'm so excited to start building it. As my first project I don't know what test pads are but I'm really glad that you would build these kits to be more novice-friendly and not so intimidating. Thank you for all your hard work!

[Helder]

Added the images of the final PCBs I got from the manufacturer to Wermy's first post, late next week they should be here.

[yogurtcup]

What happened to this board?

[rodocop]

What happened to this board?

I also have a 2.2" screen and may be interested in one of those small boards with the button PCB.

[Helder]

I have a few left but the ribbon is a bit shorter than what is required to reach the controller board and the demand isn't really there since the controller boards also have the solder points on them for a wire install for for these screens.

[yogurtcup]

I have a few left but the ribbon is a bit shorter than what is required to reach the controller board and the demand isn't really there since the controller boards also have the solder points on them for a wire install for for these screens.

[Helder]

You both can have one of the boards but you will need to procure your own ribbons which are the reverse kind, so one side has the pins up while the other has the blue backing with the length of 120mm. Send me a PM if you want one of these boards.