Is this Raspberry Pi/PCB Ruined. [Solved]

[Noah Feller]

I was testing the connection of each of the holes from my Raspberry Pi to the PCB. All of the connections were good except for the Select (SCT) hole. I provided images of what they look like. I have tried sticking a wire with solder on it into the hole and sticking my soldering iron back into the hole but the their is still no connection. Did I completely destroy the socket? Is there a way to fix this?

file2.jpeg (765.63 KiB) Viewed 3059 times

file1.jpeg (2.1 MiB) Viewed 3059 times

attachment=2]file.jpeg[/attachment]

[wermy]

Looks like just some scorched flux to me, it's probably fine. Are you sure you're testing the right pads, though? The one you circled is SCL, which is different from the select button - the select button GPIO pin is on the other end of the pi (SEL).

[Noah Feller]

I got SCL and the select button confused. I didn’t see the SCL test pad at first. I found the SCL test pad and the connection worked. I just plugged in the screen and the MintyPi is working. Thanks.

[Noah Feller]

All Fixed.