[Gauging Interest] Safe Shutdown (BangGood edition)
- johnny-bert
- Posts: 27
- Joined: Tue Aug 02, 2016 3:36 pm
- Location: Lower Franconia
- Has thanked: 26 times
- Been thanked: 5 times
Re: [Gauging Interest] Safe Shutdown (BangGood edition)
@Camble
Perhaps something between 3.6V and 4.0V... to have a good collaboration with the Pololu voltage Regulator (https://www.pololu.com/product/2123.
Perhaps something between 3.6V and 4.0V... to have a good collaboration with the Pololu voltage Regulator (https://www.pololu.com/product/2123.
-
- Posts: 263
- Joined: Sun May 22, 2016 6:22 am
- Location: France
- Has thanked: 137 times
- Been thanked: 37 times
Re: [Gauging Interest] Safe Shutdown (BangGood edition)
Are you sure the banggood power supply supports NIMH ?johnny-bert wrote:Hi,
for me personally, it's important, because I'm using NiMH-batteries.
So I would like to adjust the shutdown-voltage.
Adjustment possible through changing resistors (with resistors or potentiometer) -> GREAT!
It's made for lithium, be careful.
- johnny-bert
- Posts: 27
- Joined: Tue Aug 02, 2016 3:36 pm
- Location: Lower Franconia
- Has thanked: 26 times
- Been thanked: 5 times
Re: [Gauging Interest] Safe Shutdown (BangGood edition)
@SidSilver:
I will neither use the banggood nor the adafruit powerboost charger . As mentionend I will use the Pololu S7V8F5 and willingly this safe shutdown board.
I will neither use the banggood nor the adafruit powerboost charger . As mentionend I will use the Pololu S7V8F5 and willingly this safe shutdown board.
- Camble
- Posts: 885
- Joined: Thu May 05, 2016 2:31 am
- Location: Scotland
- Has thanked: 269 times
- Been thanked: 488 times
Re: [Gauging Interest] Safe Shutdown (BangGood edition)
@johnny-bert I may have resistors I can use to program the comparator with a voltage within your range.
- johnny-bert
- Posts: 27
- Joined: Tue Aug 02, 2016 3:36 pm
- Location: Lower Franconia
- Has thanked: 26 times
- Been thanked: 5 times
- Camble
- Posts: 885
- Joined: Thu May 05, 2016 2:31 am
- Location: Scotland
- Has thanked: 269 times
- Been thanked: 488 times
Re: [Gauging Interest] Safe Shutdown (BangGood edition)
@johnny-bert Can you measure the output voltage of your Pololu and let me know? It won't be exactly 5v. Connect up some stuff to it and measure the voltage.
- johnny-bert
- Posts: 27
- Joined: Tue Aug 02, 2016 3:36 pm
- Location: Lower Franconia
- Has thanked: 26 times
- Been thanked: 5 times
Re: [Gauging Interest] Safe Shutdown (BangGood edition)
@Camble
I can do the measurement, but not before tomorrow.
Edit: Multimeter said 4.91V.
I can do the measurement, but not before tomorrow.
Edit: Multimeter said 4.91V.
- Camble
- Posts: 885
- Joined: Thu May 05, 2016 2:31 am
- Location: Scotland
- Has thanked: 269 times
- Been thanked: 488 times
Re: [Gauging Interest] Safe Shutdown (BangGood edition)
Two resistors: 115K & 316K would give you a low batt reading at 3.6vjohnny-bert wrote:Multimeter said 4.91V.
Who is online
Users browsing this forum: No registered users and 1 guest