[WANTED] 3D Printed LCD / Button Frame
[WANTED] 3D Printed LCD / Button Frame
Hello I am looking for anyone that can print this out for me. I dont want all the pieces of it. Just the LCD Frame - Button holder. Here is the link.
https://www.thingiverse.com/thing:1724129
I was going to get it from thingiverse but they want almost 30 bucks just for the frame and button holders.
Thank you for your time!
https://www.thingiverse.com/thing:1724129
I was going to get it from thingiverse but they want almost 30 bucks just for the frame and button holders.
Thank you for your time!
Re: [WANTED] 3D Printed LCD / Button Frame
hey !
try on shapeways.com :
upload the stl file that you get from your link.
shapeways will tell you that it has issues, click on the 'view issues' next to the material/color that you want, then click on 'wall thickness'.
on the bottom right click on 'fix issues', it will take few seconds, then click on 'save and exit'.
then go back to your model and it should be ready to order (6.73eur for white polished plastic).
tell me if it works
try on shapeways.com :
upload the stl file that you get from your link.
shapeways will tell you that it has issues, click on the 'view issues' next to the material/color that you want, then click on 'wall thickness'.
on the bottom right click on 'fix issues', it will take few seconds, then click on 'save and exit'.
then go back to your model and it should be ready to order (6.73eur for white polished plastic).
tell me if it works
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: [WANTED] 3D Printed LCD / Button Frame
If shapeways doesn't work out let me know - I could print one for you.
Re: [WANTED] 3D Printed LCD / Button Frame
Its seems not to want to fix for me. I say fix problems, then click save and exit but it pops up with an error. I try this with other files and it works just fine.
- Dr. Tortenkopf
- Posts: 3
- Joined: Tue Sep 13, 2016 1:39 pm
- Has thanked: 1 time
- Been thanked: 1 time
Re: [WANTED] 3D Printed LCD / Button Frame
I had good experiences with taking the files directly to 3D Hubs too.
Lots of choice that way.
Lots of choice that way.
Re: [WANTED] 3D Printed LCD / Button Frame
I believe the users name is Goldfish on here. I've printed everything except for the battery holder. The screen surround works great but the top screw posts that secure the case don't quite line up so it took a little sanding to make it work. Hope these help.Megiddo wrote:That's actually really cool. I wonder if they're a member of this board? I'd like to see some better pictures.
- Attachments
-
- 20160824_065802.jpg (2.8 MiB) Viewed 9779 times
-
- 20160824_065358-1.jpg (946.51 KiB) Viewed 9779 times
-
- 20160818_073714.jpg (3.24 MiB) Viewed 9779 times
-
- 20160818_065113.jpg (4.68 MiB) Viewed 9779 times
-
- 20160818_065833.jpg (4.09 MiB) Viewed 9779 times
Re: [WANTED] 3D Printed LCD / Button Frame
Nice to see some other people using my designs, i will be updating them in a short time, as like you say post screws are a little off and i have tweaked the bottom screen holder so its all still work in progressKalen wrote:I believe the users name is Goldfish on here. I've printed everything except for the battery holder. The screen surround works great but the top screw posts that secure the case don't quite line up so it took a little sanding to make it work. Hope these help.Megiddo wrote:That's actually really cool. I wonder if they're a member of this board? I'd like to see some better pictures.
Will be adding some more pics soon
Who is online
Users browsing this forum: No registered users and 1 guest