Yeah mine both got hot. But I'm sure sure how hot exactly. Or if it was abnormal, I think they will always get a bit hot. Next time I open mine up I'll feel the temp.
I haven't had any issues with low battery. On my first build I had no safe shutdown and it would just shut off when the battery was low/dead, I don't remember it restarting. then I would charge. (I sold this one so I can't test it anymore)
2nd build has the safe shutdown by camble and it warns me.
Power Bank Boost plate!
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: Power Bank Boost plate!
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: Power Bank Boost plate!
Thanks. Mine got pretty warm yesterday after being on for over an hour. No adverse affects noted however just felt hotter than my build with a Powerboost.rodocop wrote:Yeah mine both got hot. But I'm sure sure how hot exactly. Or if it was abnormal, I think they will always get a bit hot. Next time I open mine up I'll feel the temp.
I haven't had any issues with low battery. On my first build I had no safe shutdown and it would just shut off when the battery was low/dead, I don't remember it restarting. then I would charge. (I sold this one so I can't test it anymore)
2nd build has the safe shutdown by camble and it warns me.
I touched the actual module yesterday while open and was definitely too hot to keep my finger on it for long. Normal behaviour by the sounds of it though so all good.
Don't have a safe shutdown so may wire in a low battery LED instead.
.
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
Re: Power Bank Boost plate!
FWIW, most major metropolitan areas in Canada have at least one electronics supply store that sells Adafruit stuff. If you can do a local pick up, it's a lot cheaper than ordering from the US; if you're having it shipped within Canada, it will still be significantly cheaper.rodocop wrote:It would cost way too much to have a power boost shipped from adafruit to Canada, so I got a few of these and have never had issues.
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: Power Bank Boost plate!
@ICMF
Yeah, I may have been able to find something local but I couldn't seem to find anything in Saskatoon (didn't look too hard though, but I found a vendor is British Colombia though for future purchases), but even so it was much cheaper to get a few of these from banggood vs the powerboost 1000 from adafruit (or adafruit vendor).
Yeah, I may have been able to find something local but I couldn't seem to find anything in Saskatoon (didn't look too hard though, but I found a vendor is British Colombia though for future purchases), but even so it was much cheaper to get a few of these from banggood vs the powerboost 1000 from adafruit (or adafruit vendor).
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
Who is online
Users browsing this forum: No registered users and 1 guest