[FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
[FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
It consists of two parts: one that goes below the cartridge slot to help you raise it up just enough, center it, and easily glue it in place, and one part that goes on top to reinforce it. Be sure to watch the video guide to more clearly see how to install it!
https://www.youtube.com/watch?v=eM3eNAOCphk
Get it on the market!
http://market.sudomod.com/3d-printed-ds ... slot-mount
STL file for printing your own can be downloaded here: http://sudomod.com/wp-content/uploads/2 ... _mount.zip
- AJRedfern
- Posts: 85
- Joined: Wed Sep 07, 2016 4:29 am
- Has thanked: 53 times
- Been thanked: 54 times
- Contact:
Re: [FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
@wermy I'm going to be ordering some of your new 3D printed parts from this part of the project in the next week, if I put in a bit extra could you do a few Volume Wheel and Pi Zero blocks for me also?
Last edited by AJRedfern on Sun Sep 25, 2016 12:19 am, edited 1 time in total.
AJRedfern - Author of the Game Boy Zero Splash Screen seen in Wermy's Custom Parts Guide Pt 2.
http://www.sudomod.com/forum/viewtopic.php?f=8&t=1440
http://www.sudomod.com/forum/viewtopic.php?f=8&t=1440
Re: [FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
What about some of the little 3D printed square pieces? Can I buy a few of those
P.S. Just ordered
P.S. Just ordered
- WoodMill
- Posts: 181
- Joined: Tue Sep 06, 2016 11:57 am
- Location: Indianapolis, Indiana, USA
- Has thanked: 21 times
- Been thanked: 29 times
Re: [FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
Boo. The card reader is the next step of mine, and i JUST drilled holes and mounted my tactile buttons where the back support legs go.
Suppose I could print the brace with added supports moved closer to the center, and then cut off the outside ones. I'll have to print one to see how it looks.
Thanks again for doing all the hard work and releasing it on your site! Love working on this project, but wouldn't have been able to do it without everyone's help and information.
Suppose I could print the brace with added supports moved closer to the center, and then cut off the outside ones. I'll have to print one to see how it looks.
Thanks again for doing all the hard work and releasing it on your site! Love working on this project, but wouldn't have been able to do it without everyone's help and information.
Follow my Youtube Vlog about Filmmaking
https://www.youtube.com/playlist?list=P ... P0H6UZe1ds
https://www.youtube.com/playlist?list=P ... P0H6UZe1ds
-
- Posts: 4
- Joined: Thu Feb 02, 2017 2:57 pm
- Location: Los Angeles
- Has thanked: 10 times
Re: [FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
Will this work with the GB Cartridge slot sold on Handheld Legend?
- abrugsch
- Posts: 971
- Joined: Tue Aug 02, 2016 10:00 am
- Has thanked: 356 times
- Been thanked: 430 times
- Contact:
Re: [FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
(don't know about HHL... if they are DS Lite then yes, if they are DS (fat) then maybe... if they are GBA, unlikely)homebrewchemist wrote:Will this work with the GB Cartridge slot sold on Handheld Legend?
It will work with my slots:
http://www.sudomod.com/forum/viewtopic. ... 57&p=21198
Re: [FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
I realize this is a post from long ago, but if I want to order multiples of these how can I do it besides running multiple transactions. Did you aver get a system setup for adding to cart?
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: [FOR SALE][Worldwide] 3D-Printed DSL GBA Cartridge Slot Mount
So no, I never got that set up - orders died down quite a bit so it didn't seem like as much of a necessity. If you have a few things you'd like to get at once, shoot me a PM and we can work it out.
Who is online
Users browsing this forum: No registered users and 1 guest