[FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
[FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace
It can be used with the aftermarket switched used in the above guide, as well as the original DMG switch. You just glue it in place (with the wider edge facing the right), and glue your switch down between the two ridges! You don't need much glue at all this way, so it's much cleaner.
Be sure to watch the video guide to more clearly see how to install it!
https://www.youtube.com/watch?v=eM3eNAOCphk
Get it on the market!
http://market.sudomod.com/3d-printed-power-switch-brace
STL file for printing your own can be downloaded here: http://sudomod.com/wp-content/uploads/2 ... e.stl_.zip
-
- Posts: 53
- Joined: Thu Jul 28, 2016 8:54 am
- Has thanked: 2 times
- Been thanked: 2 times
Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace
Can this be used with the safe shutdown pcb/switch?
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace
Not sure yet! I should be getting mine any day now, and that's the first thing I'll check.tlxxxsracer wrote:Can this be used with the safe shutdown pcb/switch?
Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace
Good to see confirmation that someone in the states hasn't gotten their shipment yet either. I just checked the mail and was starting to get worried since i'm on the east coast and should therefore take a short amount of time to get here. :/wermy wrote:Not sure yet! I should be getting mine any day now, and that's the first thing I'll check.
- johnny-bert
- Posts: 27
- Joined: Tue Aug 02, 2016 3:36 pm
- Location: Lower Franconia
- Has thanked: 26 times
- Been thanked: 5 times
Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace
Nice addition, wermy!
Thank you for your work.
Thank you for your work.
-
- Posts: 3
- Joined: Sat Jun 11, 2016 2:57 pm
- Has thanked: 3 times
Re: [FOR SALE][Worldwide] 3D-Printed GB Power Switch Brace
Hi Wermy,
Do you know if the switch brace works with the safe shutdown pcb by Camble ?
Do you know if the switch brace works with the safe shutdown pcb by Camble ?
Who is online
Users browsing this forum: No registered users and 1 guest