Veteran's 2nd GBZ (HDMI Screen) (Completed)

[Abunchahicks]

[skorpien]

Sorry it took a while, but here are pictures of my screen.

[vnman]

I need a bracket for this screen

Or some 3D printed screw bracket so that I can screw the two halves of the case together.

For anyone interested (it been done but no one posted it here) you can shave off 1 mm on the screen by carefully bend away the ribbon cable and cut off the white plastic part on the screen.
I do not have a dremel so I have to sand the two sides of the front half of the case by hand now the screen fits, just a little tight.

[VeteranGamer]

I need a bracket for this screen

Or some 3D printed screw bracket so that I can screw the two halves of the case together.

For anyone interested (it been done but no one posted it here) you can shave off 1 mm on the screen by carefully bend away the ribbon cable and cut off the white plastic part on the screen.
I do not have a dremel so I have to sand the two sides of the front half of the case by hand now the screen fits, just a little tight.

these might be of some help.....

HDMI ScrewBracket.stl

(6.21 MiB) Downloaded 432 times

HDMI Button Wells.stl

(475.18 KiB) Downloaded 411 times

place the screw bracket at the top and the button wells at the bottom, and the screen should slide in....

HDMI BWELLS with Analog.stl

(507.31 KiB) Downloaded 351 times

this is a prototype, i havent used it so it may not be 100% (but its for anyone who wanted to add an analog stick)

hdmi gbz.stl

(2.68 MiB) Downloaded 554 times

this is the one i used, but i have to modify it with a dremel to get everyting to fit right (where i placed the Pi Zero)




Holders for Helder Power Strip and the Class D Amp

Board Holders.stl

(35.43 KiB) Downloaded 410 times

.

[vnman]

Thanks for the files. unfortunately I do not have a 3D printer.

The only high street shop where I live that sell 3D printers listed one @ $400 and another @ $800. Too dear for me.

maybe @Pixel_92 can help out?

[VeteranGamer]

Thanks for the files. unfortunately I do not have a 3D printer.

The only high street shop where I live that sell 3D printers listed one @ $400 and another @ $800. Too dear for me.

maybe @Pixel_92 can help out?

i dont have a 3d printer either (really need to get one)....

i've always used 3d hubs https://www.3dhubs.com/

depending on where you live, there should be someone local to you that offeres a service.....

or you can ask one of the sudomod members nearest to you to help you out (there has to be someone)

.

[vnman]

Maybe I'll buy this one - Dremel 3D40 3D-skriver

Early XMas present to myself "pssttt....rememeber NOT TO TELL THE WIFE..." (thats me talking to myself)

After some more research, found one site locally that can do the print also they sell Wanhao printer at reasonable price...

[PIXeL_92]

Hmmm didn't get a notification to say I had been tagged, just browsing the forums and came across this. If anyone in the UK needs some parts printing and the owner of the STL has either made the file public or given you permission to have them printed then PM me I have a couple printers.

[YaYa]

The mention engine is not working unfortunately

[snoek09]

Is it possible to get stereo sound using this screen and wiring it to a jack plug?
I'm only getting sound from the left channel when I do this.