Soldering of 22 and 23 doesn't look that tidy, are you sure there's no join between the 2? Also, check the other end to ensure no solder has flowed that could touch the other wire / pad or connection etc. If that's all good, check for any power wires in close proximity as this can affect the data w...

Looks cool!

Very different, I'm sure it'll start some discussions when you I'll it out on the bus or train

Nice!

I was thinking about doing a vlog of my on again off again build.

I need to find a week when I have all the parts to put into doing this.

Will follow your progress, good luck!!!

tomsupergreen wrote:Hey!

Still 2 left

7 euro for shipping cost (including insurance).

Pm me if you want it

Awesome PM sent

An AIO with a module holder will mostly be a complete solution for a true AIO. GBZ using CM3 would be powerful and compact. I doubt it will be cheap. $25 for the lite module isn't a bad price. I intend to have a look at the pinout and see what's possible to do with in for my projects. Put me on the...

Hi Helder I tried this and wired the way tech advised above and also the other way following your wiring diagram colours to be sure. No luck I'm afraid it doesn't register on a PC unfortunately. Anything else that's possible? Thanks for your help Helder IT should show up as a usb hub and the Atmega...

Twist the usb wires and also be sure PP22 and PP23 are not touching the Ground pad right next to each point. Use a multimeter to be sure the wires aren't grounded. Ok so I've de soldered everything and resoldered to a new pi zero and still have the same problem. I found a multimeter I checked the i...

Hey ! I'm working on my GBZ (3 at all, for some friends too). However, and cause I didn't understood (I didn't read everything well) I have some spare part to sell: - 2 x Safe shutdown for BangGood (V1.0). One never used, and one used once (to understand I was wrong). All works fine. Payed 33€ Aske...

Okay, well let us know what happens when you connect the aio board to the pc.. if you use a old usb cable to solder the wires red and black, remember that white and green are opposite of @helder 's drawing in his drawing he marked Green as D+ and White as D- while official is : Green D- and White D...

144TECH wrote:Do you have a Powerboost 1000 ?

No I'm running off a banggood powerboost.

The pi and screen are booting up fine from the power strip in the AIO board