Controls still seem as responsive as they should be. I've tried gameboy and gameboy advanced games. Glad it wasn't the wiring. This was the second time I've wired the teensy to the control pcb.. hopefully never again.

Hello,

Thanks for all your replies. I changed the bounce value from 10 to 100 in wermy's code and it seems to be fine now for every button. Hopefully it stays that way.

Pete

I also just noticed it does multiple presses if I press the button down more to the right than in the center of the button.

Hello, I have a teensy lc connected to the standard gameboy pcb. The issue I am having is that I am getting double presses on the a and b buttons. It only occurs if I press the buttons "normally". If I press the a button harder it will only return 1 instance but softly can return 2 or 3 or even 4 in...

Here's mine and it works fine, I haven't patched into the JST though I took the 5V feed direct from the power strip to the chip, it does look like your ribbon cable may not be in all the way so try that. The other thing is do you have your SD card in the Pi Zero? nothing will work if it's not prese...

Thanks for the pics Mischief. I've tried soldering directly from that 5v to the power strip. Still no luck. I think the screen is rooted. I'll order a different one today I think. With the ribbon cable it seems pushed all the way in. For some reason there is more of that black stuff on one side of t...

Thanks for checking. Is your ribbon cable a little funny like mine? Im just wondering if the screen is doa.. i guess they wont take it back after cutting wires and soldering the board..

Hey Guys,

I am getting nothing come up on my screen. Does the below look correct?

I have connected the white cable to the tv port not the pi.. but the screen does nothing..

Thanks
Pete

Hello. I have the gearbest screen. When I turn the pi on nothing is displayed on screen. Seems completely dead. I have the red power wire and ground going to the power strip and the white cable going to the tv port on the pi. I have also tried the yellow wire but same outcome. The ribbon cable looks...

Thank you Mischief!