Hi guys

Please use this section for TinyPi related shenanigans.

For downloads go to http://files.pi0cket.com

For original TinyPi help, visit http://TinyPi.pi0cket.com

And for the Pro, visit http://pro.pi0cket.com

Let's all play nice and have fun

Pete (moosepr/pi0cket)

for anyone who didnt notice, TinyPi Pro is now available on Kickstarter https://www.kickstarter.com/projects/pi0cket/tinypi-pro-the-worlds-smallest-raspberry-pi-gaming The campaign runs until the end of the month, and its already over 100% so it will be going all the way :) Any questions, feel free ...

looking good

you need to re-make it all, and add in the option

-DSTATISTICS=0

that will set it to be off

'-DSTATISTICS=number: Specifies the level of overlay statistics to show on screen. 0: disabled, 1: enabled, 2: enabled, and show frame rate interval graph as well.'

you have to use the flexfb driver

https://github.com/notro/fbtft/wiki/flexfb

the one built into fbtft isnt quite right for these screens

awesome news!! you could try playing with the value. It will impact the speed of the comunication if its low, stopping you being able to get a good fps. The number is used to calculate the multiplier that gets used in the actual communication speed, so it is actually impacted by the cpu clock speed....

My first thought is to check the speed, you might has a screen that doesnt like the speed you are using

Actually, if you don't have a DC pin, you might need to force it to use 9 bit data Try this sudo modprobe fbtft_device name=flexfb speed=40000000 fps=60 gpios=reset:25 sudo modprobe flexfb buswidth=9 setaddrwin=0 width=240 height=240 init=-1,0x11,-2,120,-1,0x36,0x00,-1,0x3A,0x05,-1,0xB2,0x0C,0x0C,0x...

The site has been there for a while! I'm having a bit of a re-shuffle though

Ah ok, not the screen I thought it was.

Can you probe the ribbon and the pins to prove the PCB is correct?