It's fine now. The b button I have to press a little harder than the rest, but it turns out the problem was I was leaving a little bit of the fibers from the rubbing alcohol pad on the metal.

I've been disassembling and reassembling the mintypi after using alcohol wipes, and I'll gain access to one button then lose another. Is it still a problem with it being dirty, or is it placement of the rubber pad?

So I opened the mintypi to try and see if I could fix something, and after I screwed it together, the a, b, x, and y buttons stop working. I opened it again and noticed the buttons would work when I used the rubber pad for the d-pad on the other side of the pcb. I don't understand why some rubber pa...

So I recently purchased a mintypi off of eBay, and was wondering about the audio. Is it normal for the audio to sound a little scratchy when I emulate games other than like Gameboy and Atari? It's not the end of the world if I can't fix it since I still have audio, but it sounds pretty awful (majori...

I'm a little ticked off by the fact that helder will no longer be selling v2 boards, as my faceplates are only compatible with v2 boards. I'm also upset because I literally bought my 3d printed parts 1 week ago, just to find out the new board is incompatible. I'll just buy the updated 3d printed par...

I saw that helder sent his v3 board to wermy with a redesigned board and i noticed the button placement is different. I want to buy a board and screen that will work with my current 3d printed parts.