Just as I am putting the finishing touches on the build I've been working on and off for oh so many months at this point... another hiccup. As of now, I have a working Gameboy Zero with a gorgeous and responsive DPI display (huge thanks to TinkerBOY and everybody else who helped along the way). I 3d...

After lots of testing, I figured out that the issue was software. So, I found a forum post somewhere mentioning that retrogame might've been interfering with their PWM audio. I was using TinkerBOY's image, with the config file for DPI display, the DPI overlay file and retrogame pre-installed. I didn...

Okay, so after getting some sleep I realize now that I missed that GPIO pin 18 is still left open, so I can use the PWM capabilities of that pin. Only problem is, I cannot seem to get it to enable. I followed uncommented and slightly modified the config.txt file to add the lines needed to enable PWM...

Hello Gamboy Zero community, I have been building a pi zero build using TinkerBOY's DPI adapter (https://www.tinkerboy.xyz/product/tinkerboy-dpi-adapter/) and control board version 2.0.1 (https://www.tinkerboy.xyz/product/game-boy-controller-v2-0-for-game-boy-zero-3/) with a Pro Micro to handle butt...

I am looking to build a Gambeoy Pi Zero with Tinkerboy's DPI adapter, but the Gearbest screen that it is compatible with is out of stock or discontinued. After a bit of searching I found something that looked to be the same on Newegg and a couple other sites, but couldn't be totally sure. It really ...

Have you tried instructions at https://github.com/RetroPie/RetroPie-Setup/wiki/Wifi ? Yeah, I just skimmed through it and tried most of the methods listed but it seems like it doesn't detect the onboard wifi chip at all. I just decided to borrow a wifi dongle from a friend to finish the retropie up...

I just bought a new Raspberry Pi Zero W and made an SD card with Retropie (from Tinkerboy's link with the adafruit retrogame preinstalled) but no matter what I do I cannot get the WiFi to work properly. I'm a newb when it comes to Raspberry Pi and Linux, but I've been trying for the past couple hour...

Hey TinkerBoy, thanks for the quick response! After a couple days away from the project I came back to it today to make sure of some things. First, I used my multimeter to make sure all my solder joints were good. Everything checked out. Not knowing what else to do I watched a video of somebody else...

Hi all, so I'm making my first game boy pi zero with the TinkerBoy 1.1 board ( http://www.tinkerboy.xyz/product/game-boy-controller-v1-1-pcb-for-game-boy-zero-3/ ) I got it all wired up according to these helpful guides: http://www.tinkerboy.xyz/gpio-button-guide-for-game-boy-controller-v2-0-v1-1/#c...