Hey guys I did try the jumper wire and confirmed it was getting power with my multimeter.

I also reflowed all the connections and still no luck...

YaYa wrote: ↑

Sat Feb 17, 2018 1:05 pm

Nice job ! The look is very cool !

Thanks YaYa!

Hey rodocop, No sound at all unless I plug in my headphones, and i only get static through the head phones. I did read through the support thread but nothing I haven't already tried. I will look into the resistors. Hey Veteran Gamer, Thanks for the tip I will try that this weekend. before I try the ...

Looks good, takes up very minimal space!

Hey RodoCop, I downloaded both the Config.txt and the cmdline.txt files from the Helder support thread and replaced the originals on the SD card. I didn't edit the actual text. It should be okay then. But confirm that this is at the bottom of the config.txt dtoverlay=pwm-2chan,pin=18,func=2,pin2=13...

You can cut the plastic casing off that battery and it will fit in the case exactly, actually you can even have a little more room for wires (if you forgo pogo pins) if you remove a small piece of insulating plastic and replace it with tape. You know I've done that before with other battery types, ...

Hey RodoCop, I downloaded both the Config.txt and the cmdline.txt files from the Helder support thread and replaced the originals on the SD card. I didn't edit the actual text. It should be okay then. But confirm that this is at the bottom of the config.txt dtoverlay=pwm-2chan,pin=18,func=2,pin2=13...

Hey RodoCop, I downloaded both the Config.txt and the cmdline.txt files from the Helder support thread and replaced the originals on the SD card. I didn't edit the actual text. I am using a no clean lead free solder so the solder points look a bit dull. I will try and remelt them. Not sure what else...

Hello Everyone, My name is David, Saludos from Los Angeles! Figured I would start my own build log. I am currently working on a transparent green build using Helders AIO 2.0. Not new to tinkering and such but definitely have loads and loads to learn. Just want to thank all the members and mods for t...

Ditto what billy said.

Looking forward to the next release!