Search found 81 matches

by Mario.Semiglia
Tue Mar 13, 2018 2:06 pm
Forum: Support (Game Boy Zero)
Topic: Teensy and PCB Help
Replies: 7
Views: 4270

Re: Teensy and PCB Help

I would recommend to wire the ground from the pcb directly to the teensy and the ground of L and R to pin 15... then you can test if its working by pluging it derectly to a pc on a word documment (you should get letters: a s w and so on), if you do not get anny letters, keep it plugged in and use a ...
by Mario.Semiglia
Mon Mar 12, 2018 9:13 am
Forum: Support (Game Boy Zero)
Topic: GBZ No sound coming from speaker
Replies: 3
Views: 2937

Re: GBZ No sound coming from speaker

I am not shure about it but I think you have the wrone headphne socket... you should have bought one with 5 pins and not with 3, check that out
by Mario.Semiglia
Mon Mar 12, 2018 9:02 am
Forum: Support (Game Boy Zero)
Topic: Teensy and PCB Help
Replies: 7
Views: 4270

Re: Teensy and PCB Help

Where is your Ground wire going? in the upper picture you use a red cable (or at least its how it looks) and in your kitsch bent the wire is blue. I know its a very stupid what I am pointing but in any case I would check that the ground is well wired... how did you make the ground for the L and R? d...
by Mario.Semiglia
Sun Mar 11, 2018 12:44 pm
Forum: Support (Game Boy Zero)
Topic: Display identification help
Replies: 4
Views: 2679

Re: Display identification help

Hallo, if you have a multimeter you could track where the multimeter reads 5v... I am not really shure but I think you should try tracking where the power of this 470 resistor is going... IMG_20180310_234018944_LL.jpg I would try to make a bridge with the miltimeter between your red wire and the pla...
by Mario.Semiglia
Sun Mar 11, 2018 12:02 pm
Forum: Support (Game Boy Zero)
Topic: BW screen problems and better alternative?
Replies: 4
Views: 2677

Re: BW screen problems and better alternative?

XD we posted at the same time XD
by Mario.Semiglia
Sun Mar 11, 2018 12:01 pm
Forum: Support (Game Boy Zero)
Topic: BW screen problems and better alternative?
Replies: 4
Views: 2677

Re: BW screen problems and better alternative?

Hallo! https://www.gearbest.com/development-boards/pp_29447.html I got this one recommended by VeteranGamer, he told me that it doesnt need any modification, I did not buy it yet. that the screen, and it shouldnt need an modification (it doesnt have a screen adjustment board, but really thats not ne...
by Mario.Semiglia
Sat Mar 10, 2018 1:40 am
Forum: Support (Game Boy Zero)
Topic: Function button, plus and minos buttons
Replies: 7
Views: 4470

Re: Function button, plus and minos buttons

In case I go for that one:

do you remove the withe plastic and wire directly to the board or do you just plug it in and soder to the pi?
how do you get the best results for no interference?

did you tried that game?
by Mario.Semiglia
Fri Mar 09, 2018 12:02 pm
Forum: Support (Game Boy Zero)
Topic: Function button, plus and minos buttons
Replies: 7
Views: 4470

Re: Function button, plus and minos buttons

Thanks for your answer! I really apreciate your time and your compliment about my build :oops: I think your builds are bad ass loocking I did try using an other button but no chance... I will try find a solution once more and if not I will go for the screen you told me: is this boy the one you are t...
by Mario.Semiglia
Tue Mar 06, 2018 12:37 pm
Forum: Support (Game Boy Zero)
Topic: Function button, plus and minos buttons
Replies: 7
Views: 4470

Re: Function button, plus and minos buttons

Hallo Veteran Gamer, But have you notched up the brightness via the control board that came with the screen... And now can't turn it down... thanks for your reply, the proble I had is the following: I actually did not manage to make the down button from the control board to work, the up button worke...
by Mario.Semiglia
Mon Mar 05, 2018 10:35 am
Forum: Support (Game Boy Zero)
Topic: mintyPi image for GBZ
Replies: 9
Views: 6675

Re: mintyPi image for GBZ

Hallo guys, I have a little question, can I add a function button even if I am using a teensy board? I was planing to add two buttons to the Teensy to use as + and - to adjust my brightness and to add a function button to the GPIO would that work? can you please tell me which command do I need to ad...