It's finished and working! Here are two photos - I may upload a video later,

I fixed it

The problem was that I'd wired for 888, but was outputting 666. Thanks!

I've got an image now! Thanks! There's just one issue: I get no red channel and the colors look crazy :( Take a look at what I mean: IMG_0777.JPG IMG_0779.JPG It's possible that it's wiring, though I went over it at least 5 times to make sure it wasn't that. It looks as though greens are blue, reds ...

That looks really good! I have to know, though - where did you get the PCB? I haven't been able to find a single one over the past few months.

How are you doing input? Are you using an arduino? If you are, you can use the Mouse.h library. It's documented on arduino.cc.

I'm trying out a DPI setup on my pi. The problem is that my screen only shows white. I've used the screen's datasheet to setup the DPI timings and made sure it's been wired properly. Has anybody else experienced anything like this? Were you able to fix it? I'm using the LQ35NC111. My config.txt has ...

This is the second generation of my GB3-Slim. The first version had space management problems and used a composite display. I wanted to improve the internal space management and use a DPI display. Here it is! I'm about 80% complete. I've gotta connect the display to the GPIO and then it will be comp...

I've been using Onshape for my modelling. It's free and completely browser based. It's also really easy to use/learn.

Did you set safe shutdown and speakers actually? On the first photos didn't seem so. I programmed the arduino to send a shutdown command when I pulled both triggers and pressed d-pad down. The sound does in fact work, but only in the assembled version. The inside pics aren't complete. I made some w...

Did you set safe shutdown and speakers actually? On the first photos didn't seem so. I programmed the arduino to send a shutdown command when I pulled both triggers and pressed d-pad down. The sound does in fact work, but only in the assembled version. The inside pics aren't complete. I made some w...