WII U RASPBERRY PI 3 FINISHED

Want to show off your own project? Want to keep a build log of it? Post it here!
digitalgamingheaven
Posts: 2
Joined: Tue Jul 25, 2017 1:36 pm
Has thanked: 1 time

Re: WII U RASPBERRY PI 3 FINISHED

Post by digitalgamingheaven » Sat Jul 06, 2019 6:17 am

I have exactly the same issue, I am also using the Retro PSU with the powerboard and the Pi shuts down after a few seconds.
Also using Veterangamer's component list.
Any ideas appreciated.

Borathion
Posts: 2
Joined: Sun Jul 07, 2019 6:37 pm

Re: WII U RASPBERRY PI 3 FINISHED

Post by Borathion » Sun Jul 07, 2019 6:42 pm

I have done a similar project but using a 7inch screen (had to expand the whole unit) and a power brick instead of a power board. Using a Teensy LC with Xinput. Everything seems to work fine on the PC but the Analog sticks only activate if pressed. When pressed they work fine. Otherwise they drift instantly to the lower right. This is on both sticks (using the wii u gamepad sticks and buttons). Happens even when disconnected the click button. On the raspberry pi (RetroPi) The triggers dont work. I have the triggers set to buttons. Should I, could I, have them set up as Triggers but only min and max??

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2736
Joined: Thu May 05, 2016 8:33 am
Location: Fall River, MA
Has thanked: 1398 times
Been thanked: 3064 times

Re: WII U RASPBERRY PI 3 FINISHED

Post by Helder » Sun Jul 07, 2019 6:56 pm

digitalgamingheaven wrote:
Sat Jul 06, 2019 6:17 am
I have exactly the same issue, I am also using the Retro PSU with the powerboard and the Pi shuts down after a few seconds.
Also using Veterangamer's component list.
Any ideas appreciated.
Are you wiring the TX GPIO to the powerboard? That is what keeps the Pi and everything else powered if that is not connected to the powerboard and is also setup in the config.txt the pi will turn off after a few seconds of being turned on.
My Sale Threads:

Retro PSU, 3.5A output!


Chat with me and other members


Don't contact me about obtaining my board files (as you will not get them). Don't contact me about any of my boards if they are sold out, they will be restocked as soon as I can get them.


Don't support thieves like ckliang who copied my AIO to resell and is now cloning the mintyPi, support the original creators and not the thieves!

Borathion
Posts: 2
Joined: Sun Jul 07, 2019 6:37 pm

Re: WII U RASPBERRY PI 3 FINISHED

Post by Borathion » Mon Jul 08, 2019 1:31 am

Figured out the joystick problem, got the click and ground mixed up. Still not able to set up triggers in the main retropi screen but can in emulators but the analog sticks i can only assign up and right. Know of how this could be? On the PC everything works great.

digitalgamingheaven
Posts: 2
Joined: Tue Jul 25, 2017 1:36 pm
Has thanked: 1 time

Re: WII U RASPBERRY PI 3 FINISHED

Post by digitalgamingheaven » Mon Jul 08, 2019 4:38 am

Read an old post last night where the tx pin must be connected to the gpio pin so to keep the board alive. All working now, thanks for your help.

llonden
Posts: 10
Joined: Sat May 27, 2017 11:41 am
Has thanked: 2 times

Re: WII U RASPBERRY PI 3 FINISHED

Post by llonden » Mon Jul 08, 2019 1:22 pm

It looks like the Dual Fet part linked is no longer available. I also tried searching for the 4562 version Helder recommended. Not sure if I need to buy one with that exact model#. Any ideas on where I can get one, or anybody willing to sell me a spare?
Last edited by llonden on Mon Jul 08, 2019 1:39 pm, edited 1 time in total.

Ema908
Posts: 3
Joined: Mon Apr 15, 2019 1:05 pm
Has thanked: 2 times
Been thanked: 1 time

Re: WII U RASPBERRY PI 3 FINISHED

Post by Ema908 » Mon Jul 08, 2019 1:26 pm

Can someone tell me if the link's MOSFET is compatible with T1? https://es.aliexpress.com/item/33057594 ... c64e60[img][/img]
Attachments
kXYQb8G.png
kXYQb8G.png (25.36 KiB) Viewed 333 times

User avatar
VeteranGamer
Posts: 1676
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 488 times
Been thanked: 874 times

Re: WII U RASPBERRY PI 3 FINISHED

Post by VeteranGamer » Mon Jul 08, 2019 2:31 pm

llonden wrote:
Mon Jul 08, 2019 1:22 pm
It looks like the Dual Fet part linked is no longer available. I also tried searching for the 4562 version Helder recommended. Not sure if I need to buy one with that exact model#. Any ideas on where I can get one, or anybody willing to sell me a spare?
Ema908 wrote:
Mon Jul 08, 2019 1:26 pm
Can someone tell me if the link's MOSFET is compatible with T1? https://es.aliexpress.com/item/33057594 ... c64e60[img][/img]


https://es.aliexpress.com/item/33055381 ... f7db908bbe

https://es.aliexpress.com/item/33042117 ... 4c570dd50f



its still about....
i'm sure if you search you'll be able to get the correct ones....



if people are that stuck....
I think I have a few knocking around, I just have to find them
(but i'd suggest searching online first as they are out there, as postage alone is gonna be around £3.50/$5 from the UK)


.

Noxta
Posts: 10
Joined: Wed Apr 17, 2019 4:54 pm
Has thanked: 1 time
Been thanked: 2 times

Re: WII U RASPBERRY PI 3 FINISHED

Post by Noxta » Tue Jul 09, 2019 12:15 am

Thanks helder

I will try later

the truth do not connect it thinking it was not important

Noxta
Posts: 10
Joined: Wed Apr 17, 2019 4:54 pm
Has thanked: 1 time
Been thanked: 2 times

Re: WII U RASPBERRY PI 3 FINISHED

Post by Noxta » Tue Jul 09, 2019 8:13 am

I have connected the TX to the GPIO 14 pin of the raspberry and I have configured the /boot/config.txt adding the line at the end.

dtoverlay = gpio-poweroff: gpiopin = "14", active_low = "y"

That shows VeteranGamer.

I give the button to turn on and do the same, turn off the second.

Is there something I'm doing wrong?

Is pin 14 the physical or the bmc that would be pin 8?

P.S.

I already solved it.

I had to connect it to gpio 14, which is 8 in physics, since 14 refers to bcm.

The problem that I had that pin I have broken when trying to desoldar the pins.

Then I used the gpio 15 and it works perfectly.

It is already on.
Attachments
gpio.png
gpio.png (32.06 KiB) Viewed 276 times
Last edited by Noxta on Tue Jul 09, 2019 4:13 pm, edited 1 time in total.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest