new build,input welcome
-
- Posts: 19
- Joined: Thu Feb 22, 2018 11:59 pm
- Has thanked: 3 times
- Been thanked: 1 time
new build,input welcome
Starting this build with a stripped down pi3, 4.3lcd,6000mah battery, Im going to design and 3d print my own hinged housing. Somthing like a Gameboy SP. As of now it will have full hdmi out the back and 2 full usb out the side so when the screen is closed it can be used as a retropie base.In the top right corner it has a lcd battery %. I have a psp joystick on its way,If anyone has any input on how i should do the buttons instead of the adafruit soft tact switches let me know,and i dont know how im going to do my speakers yet,but i do have a small amplifier i can add.
- Attachments
-
- 0301180458.jpg (6.04 MiB) Viewed 2025 times
-
- 0301180459.jpg (4.65 MiB) Viewed 2025 times
- DieselDummy
- Posts: 197
- Joined: Tue Oct 24, 2017 12:20 pm
- Location: Florida, USA
- Has thanked: 80 times
- Been thanked: 92 times
Re: new build,input welcome
Love the idea. I want to do one like that eventually. As far as buttons, it may be easier to just chop a USB controller and fit the guts in there. Your build might be big enough to fit it
Links
"Battery Cover Buttons" install guide and support
My CSO build #1 - with "Battery Cover Buttons"
My CSO build #2 - the "sudoNod"
My MintyPi v3 build #1
"If you're bored, you're boring."
"Battery Cover Buttons" install guide and support
My CSO build #1 - with "Battery Cover Buttons"
My CSO build #2 - the "sudoNod"
My MintyPi v3 build #1
"If you're bored, you're boring."
Who is online
Users browsing this forum: No registered users and 1 guest