Fastest, Cleanest GB Screen Cutout (5 seconds)
Fastest, Cleanest GB Screen Cutout (5 seconds)
For those that have access to a table router and 3D printer, this is the fastest and cleanest way that I found to cut out the opening of your GB case without the need of a hand rotary tool which can be a pain and is super hard to get a clean straight cut.
You first start by printing out this print. Use a table router with a 1/4 inch flush cutting bit. Make sure bit has a guide bearing like the ones used to trim laminate counter tops. Adjust the height of the bit so the bearing rides along the 3D template. Then its just a matter of double sticking the template to the case and follow the pattern. If all went well, then in literally, 5 seconds you should have this nice straight perfect cut. Here are the files. I have included the router template for the screen opening and also a negative of that one which I didn't show in photos but if you print it and double stick it to a 1mm acrylic sheet, you can cut out screen protectors perfectly in a flash.
You first start by printing out this print. Use a table router with a 1/4 inch flush cutting bit. Make sure bit has a guide bearing like the ones used to trim laminate counter tops. Adjust the height of the bit so the bearing rides along the 3D template. Then its just a matter of double sticking the template to the case and follow the pattern. If all went well, then in literally, 5 seconds you should have this nice straight perfect cut. Here are the files. I have included the router template for the screen opening and also a negative of that one which I didn't show in photos but if you print it and double stick it to a 1mm acrylic sheet, you can cut out screen protectors perfectly in a flash.
- abrugsch
- Posts: 971
- Joined: Tue Aug 02, 2016 10:00 am
- Has thanked: 356 times
- Been thanked: 430 times
- Contact:
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
DO IT! DO IT!
get a prusia i3 clone. ~£250. done I'll get some recommendations from the hackspace for good and cheap ones if you want? (the space uses lulzbot mini and taz's which are good, but not cheap by any means...)
or do you have a maker/hackerspace near you (what city do you live in/near?)
- abrugsch
- Posts: 971
- Joined: Tue Aug 02, 2016 10:00 am
- Has thanked: 356 times
- Been thanked: 430 times
- Contact:
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
Well i3 is open source so clones are no less real than a 'real' i3
If you want any parts 3D printed or laser cut just give me a shout. I can do both for certainly cheaper than most on-demand services
If you want any parts 3D printed or laser cut just give me a shout. I can do both for certainly cheaper than most on-demand services
- abrugsch
- Posts: 971
- Joined: Tue Aug 02, 2016 10:00 am
- Has thanked: 356 times
- Been thanked: 430 times
- Contact:
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
not a printer but you can engrave them with a 2D cnc engraver or mill
- drafterITA
- Posts: 120
- Joined: Fri Feb 24, 2017 8:15 am
- Location: Italy
- Has thanked: 66 times
- Been thanked: 19 times
- Contact:
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
I want a workshop..
I hope to move to a city with one of those hackerspace
I hope to move to a city with one of those hackerspace
Cheers!
drafterITA
drafterITA
- abrugsch
- Posts: 971
- Joined: Tue Aug 02, 2016 10:00 am
- Has thanked: 356 times
- Been thanked: 430 times
- Contact:
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
I had to wait around 10 years from first discovering them to one being formed near me... Next nearest is 60 miles (95 km) away...
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
Wow i just looked up this hackerspace thing and there's one literally a walk up the street from where i used to live. Now it's like 20 miles away haha.
-
- Posts: 226
- Joined: Tue Jan 31, 2017 11:06 am
- Location: Tianjin / China
- Has thanked: 25 times
- Been thanked: 53 times
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
What a good idea. I had another idea. Maybe someone owns an CNC millimg maschine: this persone could do us a milling service? Maybe I should link this to my facebook CNC group... I don't own one of these maschines...
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
What about Laser Burner? :
There is still room for improvement, but for 1st cut I think it's not bad.
Re: Fastest, Cleanest GB Screen Cutout (5 seconds)
There's some decent ones for like 500. But making a jig and getting the cams is the hard part. I was planning to look for someone who could do it, then you could pop out fully cut cases in minutes. I thought about making them and selling em on amazon or etsy.
Who is online
Users browsing this forum: No registered users and 1 guest