[Eagle] Footprint of Raspberry Pi Zero with Bottom Pads

Various user-contributed guides for hardware-related things
Post Reply
User avatar
VitaliBR
Posts: 8
Joined: Thu Mar 09, 2017 8:18 pm
Has thanked: 7 times
Been thanked: 4 times

[Eagle] Footprint of Raspberry Pi Zero with Bottom Pads

Post by VitaliBR » Fri Mar 17, 2017 2:46 pm

Hi everyone,

After searching for a Raspberry footprint for the EagleCad and finding only that it has no bottom pads (and I need with bottom pads), I decided to create my own footprint.

I uploaded it to my github, here is the link:
https://github.com/vitalibr/rpi-zero-eagle

Image

Image

Enjoy! ;)

Woozer
Posts: 13
Joined: Mon Nov 28, 2016 1:30 am
Has thanked: 3 times
Been thanked: 2 times

Re: [Eagle] Footprint of Raspberry Pi Zero with Bottom Pads

Post by Woozer » Wed Apr 26, 2017 8:16 am

Awesome, i'll test the footprint.

Hmm, pin 1 should be above the SD testpads? Doesn't look right.

32teeth

Re: [Eagle] Footprint of Raspberry Pi Zero with Bottom Pads

Post by 32teeth » Fri Jan 05, 2018 8:27 am

This is great work!

Recommendations

1. mirror the tDocu (51) layer to bDocu (52)
Screen Shot 2018-01-05 at 10.25.42 AM.png
tDocu (51) mirrored to bDocu (52)
Screen Shot 2018-01-05 at 10.25.42 AM.png (335.33 KiB) Viewed 12127 times
2. 2x20 header... ...square via the correct end
Screen Shot 2018-01-05 at 10.28.46 AM.png
square via on bottom right of header
Screen Shot 2018-01-05 at 10.28.46 AM.png (97.54 KiB) Viewed 12127 times
3. PP5 isn't used by most Gameboy Zero builds, you can get rid of it
Screen Shot 2018-01-05 at 10.54.56 AM.png
PP5 removed
Screen Shot 2018-01-05 at 10.54.56 AM.png (330.12 KiB) Viewed 12125 times
4. You can additionally get rid of the HDMI test points (39,36,20)

5. Labels are nice ;)
Drill holes are removed as this will impact your design as well
Screen Shot 2018-01-05 at 11.11.00 AM.png
Screen Shot 2018-01-05 at 11.11.00 AM.png (249.8 KiB) Viewed 12124 times

Reference
Raspberry-Pi-Zero-Back.jpg
reference
Raspberry-Pi-Zero-Back.jpg (356.49 KiB) Viewed 12127 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest