OSD Battery Monitoring for Helder's AIO Boards

Various user-contributed guides for hardware-related things
User avatar
HoolyHoo
Posts: 720
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 716 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by HoolyHoo » Sun May 14, 2017 7:12 am

umbynos95 wrote:
Sun May 14, 2017 7:06 am
Hello, I don't have a USBasp Programmer, it is possible to use this guide instead? (http://www.sudomod.com/forum/viewtopic.php?f=25&t=1176).
I haven't used that method but as long as you get it to write the hex then yes.

User avatar
Lphillimore
Posts: 984
Joined: Sat Jan 07, 2017 7:03 pm
Location: Perth, WA
Has thanked: 784 times
Been thanked: 513 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by Lphillimore » Thu May 18, 2017 8:03 am

Hi @hoolyhoo - So my 6pin adapter arrived and i proceeded to flash the board with your nex Hex.

This was successful so booted the GBZ but no gamepad detected.

Tried a couple more times, still no joy.

Im using one of @Helder AIO 2.2

To make sure i was flashing the hex OK i test flashed Helders new Hex code and Gamepad was detected fine.

Any ideas?

Ive tried all 3 of your Hex' just to be sure. No gamepad detected for any? :ugeek:

Cheers

User avatar
HoolyHoo
Posts: 720
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 716 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by HoolyHoo » Thu May 18, 2017 8:11 am

Lphillimore wrote:
Thu May 18, 2017 8:03 am
Hi @hoolyhoo - So my 6pin adapter arrived and i proceeded to flash the board with your nex Hex.

This was successful so booted the GBZ but no gamepad detected.

Tried a couple more times, still no joy.

Im using one of @Helder AIO 2.2

To make sure i was flashing the hex OK i test flashed Helders new Hex code and Gamepad was detected fine.

Any ideas?

Ive tried all 3 of your Hex' just to be sure. No gamepad detected for any? :ugeek:

Cheers
Hmmm. Not sure. Can you walk me through your steps and maybe screen shots of avrdude after complete? I know other users have used it fine. Let me know.

User avatar
Lphillimore
Posts: 984
Joined: Sat Jan 07, 2017 7:03 pm
Location: Perth, WA
Has thanked: 784 times
Been thanked: 513 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by Lphillimore » Thu May 18, 2017 8:16 am

Thanks for quick reply.

Sure:

Upon connecting it detects AIO:

'Detected 1e9587 = ATmega32U4'


I then programme and all seems OK. As above, i tried Helders Hex and it detects so not sure its the programming? Odd though as others have had success and im using an AIO2.2

Here are screenshots of the programming start to finish:

Setup:
1.JPG
1.JPG (79.21 KiB) Viewed 2856 times
Writing:
2.JPG
2.JPG (105.59 KiB) Viewed 2856 times
Complete:
3.JPG
3.JPG (95.69 KiB) Viewed 2856 times

User avatar
HoolyHoo
Posts: 720
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 716 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by HoolyHoo » Thu May 18, 2017 8:24 am

It looks fine. I uploaded a file called TestAnalog.hex to my github. Can you test that please?

User avatar
Lphillimore
Posts: 984
Joined: Sat Jan 07, 2017 7:03 pm
Location: Perth, WA
Has thanked: 784 times
Been thanked: 513 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by Lphillimore » Thu May 18, 2017 8:33 am

Thanks! Really appreciate your help.

Just tested that Test hex but still no joy. Not detected :?:

FYI i have no analog.

User avatar
Lphillimore
Posts: 984
Joined: Sat Jan 07, 2017 7:03 pm
Location: Perth, WA
Has thanked: 784 times
Been thanked: 513 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by Lphillimore » Thu May 18, 2017 8:35 am

I havent yet wired up the additional wires to AIO and Powerboost BTW, not sure of the code relies on that being in place?


User avatar
HoolyHoo
Posts: 720
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 716 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by HoolyHoo » Thu May 18, 2017 9:01 am

This is with a leonardo on my computer since I don't have a Helder board available right now but its the same thing.
Screen Shot 2017-05-18 at 10.59.44 AM.png
Screen Shot 2017-05-18 at 10.59.44 AM.png (372.28 KiB) Viewed 2839 times

User avatar
Lphillimore
Posts: 984
Joined: Sat Jan 07, 2017 7:03 pm
Location: Perth, WA
Has thanked: 784 times
Been thanked: 513 times

Re: OSD Battery Monitoring for Helder's AIO Boards

Post by Lphillimore » Thu May 18, 2017 2:55 pm

Thanks for your help - all sorted and Gamepad now detected. Extracting the Hex from the entire 'gbzbatterymonitor-master' worked a treat.

Downloading the single Hex' from Github results in larger files which didn't work.

Now for the battery monitor code and test!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest