Are there any pin outs boards for the compute module 3

Raspberry Pi hardware discussion (including peripherals)
Post Reply
Golddeenoh
Posts: 27
Joined: Tue Dec 05, 2017 12:29 pm
Has thanked: 9 times
Been thanked: 1 time

Are there any pin outs boards for the compute module 3

Post by Golddeenoh » Thu Jan 18, 2018 7:42 am

I was thinking about doing a compute module 3 build for a GBZ and figured i would see if any one has already made a board that simply allows for easier acces to the dimm pins. Something with 100 pins on each side of the module to allow easier soldering to and running to the desired components.

I found some sockets to put the CM3 in but haven't found any simple pin out bards to have the socket attached to. I am thinking something simple enough to attach the socket to and have aaccess to the 100 pins for the odd pins on the left side of the board and 100 pins for the right side of the board so that it is easier to pin out and cheaper to make your own design.

https://www.aliexpress.com/item/5pcs-1- ... autifyAB=5

User avatar
moooarcuuuus
Posts: 232
Joined: Tue Jul 04, 2017 1:28 am
Has thanked: 2 times
Been thanked: 94 times

Re: Are there any pin outs boards for the compute module 3

Post by moooarcuuuus » Fri Jan 19, 2018 3:51 am

Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep... Game Over

User avatar
moosepr
Posts: 524
Joined: Wed Jan 25, 2017 6:18 am
Has thanked: 69 times
Been thanked: 241 times
Contact:

Re: Are there any pin outs boards for the compute module 3

Post by moosepr » Fri Jan 19, 2018 6:28 am

Get a small cheep LCD in your project https://www.sudomod.com/forum/viewtopic.php?f=22&t=2312
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919

Golddeenoh
Posts: 27
Joined: Tue Dec 05, 2017 12:29 pm
Has thanked: 9 times
Been thanked: 1 time

Re: Are there any pin outs boards for the compute module 3

Post by Golddeenoh » Fri Jan 19, 2018 8:38 am

that is some good information, i was hoping for something simpler, with out having all of the HDMI, pins, SD card, and everything else attached, something that would make it worth getting the CM3 and making it into a handheld system, otherwise it is more logical for the price to just de-solder the pi3.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest