Page 1 of 1

Are there any pin outs boards for the compute module 3

Posted: Thu Jan 18, 2018 7:42 am
by Golddeenoh
I was thinking about doing a compute module 3 build for a GBZ and figured i would see if any one has already made a board that simply allows for easier acces to the dimm pins. Something with 100 pins on each side of the module to allow easier soldering to and running to the desired components.

I found some sockets to put the CM3 in but haven't found any simple pin out bards to have the socket attached to. I am thinking something simple enough to attach the socket to and have aaccess to the 100 pins for the odd pins on the left side of the board and 100 pins for the right side of the board so that it is easier to pin out and cheaper to make your own design.

https://www.aliexpress.com/item/5pcs-1- ... autifyAB=5

Re: Are there any pin outs boards for the compute module 3

Posted: Fri Jan 19, 2018 3:51 am
by moooarcuuuus

Re: Are there any pin outs boards for the compute module 3

Posted: Fri Jan 19, 2018 6:28 am
by moosepr

Re: Are there any pin outs boards for the compute module 3

Posted: Fri Jan 19, 2018 8:38 am
by Golddeenoh
that is some good information, i was hoping for something simpler, with out having all of the HDMI, pins, SD card, and everything else attached, something that would make it worth getting the CM3 and making it into a handheld system, otherwise it is more logical for the price to just de-solder the pi3.