LCD in Australia
LCD in Australia
I bought an LCD from ebay (from china) and it arrived today but the controller board is too wide to fit in the gameboy case.
I looked at the wiki and all of the screens on there don't ship to Australia.
Any other Aussies had this problem?
I looked at the wiki and all of the screens on there don't ship to Australia.
Any other Aussies had this problem?
Re: LCD in Australia
The one I originally bought looked like the left on in this photo:
Have since ordered another off eBay that looks slightly different, so hopefully it will work.
If not, I will have to buy something like this I guess: http://core-electronics.com.au/raspberr ... gonal.html
Have since ordered another off eBay that looks slightly different, so hopefully it will work.
If not, I will have to buy something like this I guess: http://core-electronics.com.au/raspberr ... gonal.html
Re: LCD in Australia
Ebay sellers are notorious for using incorrect images or images of not the exact product. I guess you can contact them and ask them to confirm if it was exactly the same as the pictures. I orderd one that had the back buttons on the opposite side to the photos in the add. Heres the link http://www.ebay.co.uk/itm/191742290250
I have since orderd this one, postage time is slow like all chinese stuff but it looks to be the same as the gearbest screen i believe. http://www.ebay.com.au/itm/191937376024
I have since orderd this one, postage time is slow like all chinese stuff but it looks to be the same as the gearbest screen i believe. http://www.ebay.com.au/itm/191937376024
Re: LCD in Australia
The second one I ordered had no buttons on the back, so hopefully it has a small board.
The second one you posted looks perfect Rewired44. Didn't find that in my searching. Ill grab one of them if my second one doesn't work either.
The second one you posted looks perfect Rewired44. Didn't find that in my searching. Ill grab one of them if my second one doesn't work either.
Re: LCD in Australia
There are loads of Generic chinese LCDs on ebay, (fellow Australian here) but the ones that look like this: http://www.sainsmart.com/sainsmart-3-5- ... l-b-b.html are pretty competent clones of the WaveShare screens.
An amateur at best. Current project: GB 'Athena'
Re: LCD in Australia
I just got one of these delivered
http://aud.dx.com/product/et-350-3-5-tf ... -961039044
Ordered on the 28th, arrived on the 7th.
Pretty sure it has the same board as Variant 7 on the wiki, but I didnt have a chance to go over it properly yet. Probably over the weekend.
dred
http://aud.dx.com/product/et-350-3-5-tf ... -961039044
Ordered on the 28th, arrived on the 7th.
Pretty sure it has the same board as Variant 7 on the wiki, but I didnt have a chance to go over it properly yet. Probably over the weekend.
dred
Re: LCD in Australia
This seems like a pretty good option if it is indeed a v7 with seperate board for buttons, decent price aswell. Keep us posted!dredz wrote:I just got one of these delivered
http://aud.dx.com/product/et-350-3-5-tf ... -961039044
Ordered on the 28th, arrived on the 7th.
Pretty sure it has the same board as Variant 7 on the wiki, but I didnt have a chance to go over it properly yet. Probably over the weekend.
dred
Re: LCD in Australia
Hey mate I'm from Straya as well. Welcome. Yes my first LCD was also the backup monitor. I got mine from Aliexpress.
I opened it and was so annoyed to receive basically what you had but even worse. Mine had extra components so I could not cut mine off. In other words don't waste your time and buy 2 from Gear best. Apparently the most success so far is with that one. I am buying 2 but be aware it takes about 3-4 weeks...
Good luck!
I opened it and was so annoyed to receive basically what you had but even worse. Mine had extra components so I could not cut mine off. In other words don't waste your time and buy 2 from Gear best. Apparently the most success so far is with that one. I am buying 2 but be aware it takes about 3-4 weeks...
Good luck!
Re: LCD in Australia
Minor correction, the screen i got from DX above is a V8 and is working fine
Helped me discover my 5v powerpack is only spitting out 4.8v which isn't enough for the screen to function.
I'll post a pic tomorrow.
Helped me discover my 5v powerpack is only spitting out 4.8v which isn't enough for the screen to function.
I'll post a pic tomorrow.
Who is online
Users browsing this forum: No registered users and 1 guest