mintypi v3 power board
mintypi v3 power board
I have a power board that was replaced by Helder with the proper chips, but recently it's started to fail in powering the pi. I checked the connections on the board, the pi GPIO pins, even the wire harness and those are all fine. Powering the pi directly is working, but when using the power board, either with USB-C charging cable or just the battery, the pi starts and the screen flickers white before going black. I'm at the end of my rope here.
-
Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: mintypi v3 power board
Sounds like the battery is not fully charged or might not be seated properly, measure the battery voltage at the battery and the 3d pin from the top on the white connector when you press the power button.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: mintypi v3 power board
It's working now, but I'm sure it wasn't the battery. I checked the voltage with a multimeter and it was consistently giving 3.7 volts, and the leads were connected too.
Who is online
Users browsing this forum: No registered users and 1 guest