Minty Pi V3.5 Issue
-
- Posts: 2
- Joined: Sat Dec 26, 2020 8:15 pm
Minty Pi V3.5 Issue
After soldering the rasberry pi to the board and flashing the sd card the display looks like this. I seem to be able to navigate to different menus however everything is messed up and sideways. I've already checked continuity for all my soldered connections and their neighboring pads which makes me think its the screen itself, however I am not sure. I could try to resolder all the connections though i'm worried i'd make it worse and would rather not do that unless it is likely to be the problem.
- Attachments
-
- 20201226_191352.jpg (931.25 KiB) Viewed 1669 times
- LilTrublMakr
- Posts: 365
- Joined: Sun Aug 05, 2018 6:39 am
- Has thanked: 24 times
- Been thanked: 120 times
- Contact:
Re: Minty Pi V3.5 Issue
Answered in Discord but I will answer it here as well:
The v3.5 image is different than the v3 image. One of these differences is that the video drivers are different which is why you are getting a screen like that.
The v3.5 image is (hopefully) getting released tonight so keep an eye out for it: https://sudomod.com/mintypi-v3-5/
The v3.5 image is different than the v3 image. One of these differences is that the video drivers are different which is why you are getting a screen like that.
The v3.5 image is (hopefully) getting released tonight so keep an eye out for it: https://sudomod.com/mintypi-v3-5/
@LilTrublMakr
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
-
- Posts: 2
- Joined: Sat Dec 26, 2020 8:15 pm
Re: Minty Pi V3.5 Issue
Thanks that fixed it, but after assembling the entire thing and plugging it in to charge the light lit up red and charged for a bit, however when I picked it up something shorted and the light turned off. Now the battery wont charge through the usb port. I'll have to check the entire thing to see what happened.
Who is online
Users browsing this forum: No registered users and 1 guest