Raspberry Pi 0w data pad ripped off!

Having trouble with your mintyPi build? Post your questions here!
Post Reply
HelloGoodSir
Posts: 8
Joined: Thu Mar 22, 2018 4:35 pm
Has thanked: 2 times
Been thanked: 1 time

Raspberry Pi 0w data pad ripped off!

Post by HelloGoodSir » Tue Jun 05, 2018 5:09 pm

I was soldering my wire to my raspberry pi 0, and it popped off! I'm not sure what to do. And, I know how to solder (But thats beside the point.)
Attachments
IMG_0667.JPG
IMG_0667.JPG (1.62 MiB) Viewed 887 times

User avatar
ABH
Posts: 188
Joined: Sat May 28, 2016 7:01 pm
Location: Qatar
Has thanked: 79 times
Been thanked: 111 times

Re: Raspberry Pi 0w data pad ripped off!

Post by ABH » Tue Jun 05, 2018 5:41 pm

Try to remove solder mask from this part and get connection from it that’s hard but there’s no other option in my knowldge.
DF31349F-87EF-4999-9201-6F37A24E307C.jpeg
DF31349F-87EF-4999-9201-6F37A24E307C.jpeg (351.81 KiB) Viewed 884 times

HelloGoodSir
Posts: 8
Joined: Thu Mar 22, 2018 4:35 pm
Has thanked: 2 times
Been thanked: 1 time

Re: Raspberry Pi 0w data pad ripped off!

Post by HelloGoodSir » Tue Jun 05, 2018 7:36 pm

I'll try it. Thanks

exsnaggerwes
Posts: 3
Joined: Sat Jul 27, 2019 3:18 pm

Re: Raspberry Pi 0w data pad ripped off!

Post by exsnaggerwes » Sat Jul 27, 2019 3:21 pm

I have a VERY similar problem! The same exact pad on my board is bridged to ground, but I can't see how. Can anyone assist? Possibly with a gpio bypass method or something similar?

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2893
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1437 times
Been thanked: 3096 times

Re: Raspberry Pi 0w data pad ripped off!

Post by Helder » Sat Jul 27, 2019 5:06 pm

Take a picture of the area and show us, likely there is a bridge to the usb socket anchor points.
My Sale Threads:

Retro PSU, 3.5A output!


Chat with me and other members


Don't contact me about obtaining my board files (as you will not get them). Don't contact me about any of my boards if they are sold out, they will be restocked as soon as I can get them.


Don't support thieves like ckliang who copied my AIO to resell and is now cloning the mintyPi, support the original creators and not the thieves!

exsnaggerwes
Posts: 3
Joined: Sat Jul 27, 2019 3:18 pm

Re: Raspberry Pi 0w data pad ripped off!

Post by exsnaggerwes » Tue Aug 06, 2019 4:01 pm

15651287801195001293010344239230.jpg
15651287801195001293010344239230.jpg (3.12 MiB) Viewed 335 times
15651287560781713017843600956719.jpg
15651287560781713017843600956719.jpg (2.77 MiB) Viewed 335 times

exsnaggerwes
Posts: 3
Joined: Sat Jul 27, 2019 3:18 pm

Re: Raspberry Pi 0w data pad ripped off!

Post by exsnaggerwes » Tue Aug 06, 2019 4:02 pm

I removed the usb port because I believed that I may have dripped some solder through one of the mounting points, but I've cleaned it up as best I could and can't find the short anywhere. I'm really scratching my head over this. Thank you for your reply.

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2893
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1437 times
Been thanked: 3096 times

Re: Raspberry Pi 0w data pad ripped off!

Post by Helder » Wed Aug 07, 2019 3:03 pm

exsnaggerwes wrote:
Tue Aug 06, 2019 4:02 pm
I removed the usb port because I believed that I may have dripped some solder through one of the mounting points, but I've cleaned it up as best I could and can't find the short anywhere. I'm really scratching my head over this. Thank you for your reply.
Look where I drew the lines, looks like a GND trace is going to one of the data pins unless I'm mistaken. Either way just make sure all of those pins are isolated from everything so there is nothing touching.
Image
My Sale Threads:

Retro PSU, 3.5A output!


Chat with me and other members


Don't contact me about obtaining my board files (as you will not get them). Don't contact me about any of my boards if they are sold out, they will be restocked as soon as I can get them.


Don't support thieves like ckliang who copied my AIO to resell and is now cloning the mintyPi, support the original creators and not the thieves!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest