Getting no sound from speaker or headphone.
I’ve checked continuity on all audio pins. I’m getting 5v on the 2 GPIO pins I should be getting 5v on and I get continuity on them. However
On the D1 pin pictured I do not get 5v, I’m showing less than 2.
Also on the U2 I think in the other pic, I also do not get 5v on those pins. Do I need to reflow those?
Help just received this boars the other day.
Sound help. Sorry!
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: Sound help. Sorry!
Do you have continuity from the 5v GPIO to the D1 pad highlighted on the image on the wiki? I can see you are not powering the Pi & Controller from the powerboard so you are seeing 5V from the usb plugged into the Pi.
If there is no continuity from 5v GPIO to that D1 pad then there is no sound plain and simple, since it relies on 5V from the powerboard or USB power input to work.
If there is no continuity from 5v GPIO to that D1 pad then there is no sound plain and simple, since it relies on 5V from the powerboard or USB power input to work.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: Sound help. Sorry!
You know what, I do not think there is continuity from the 5v to the D1.Helder wrote: ↑Fri Jun 21, 2019 6:21 amDo you have continuity from the 5v GPIO to the D1 pad highlighted on the image on the wiki? I can see you are not powering the Pi & Controller from the powerboard so you are seeing 5V from the usb plugged into the Pi.
If there is no continuity from 5v GPIO to that D1 pad then there is no sound plain and simple, since it relies on 5V from the powerboard or USB power input to work.
If I don't, where should that be coming from.
- LilTrublMakr
- Posts: 365
- Joined: Sun Aug 05, 2018 6:39 am
- Has thanked: 24 times
- Been thanked: 120 times
- Contact:
Re: Sound help. Sorry!
If you don't have continuity between the 5v pin and D1, it means that there is no connection which means you need to reflow those pins on the board. All 5 links in the image below need continuity for sound to work.
@LilTrublMakr
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
Who is online
Users browsing this forum: No registered users and 1 guest