Bent pin in battery cable socket
Posted: Sun Jul 14, 2019 8:21 am
Mintypi works great, but won't run off battery power.
Continuity is good all around -- but one of the pins in the PCB battery cable socket (6 pins, off-white) is bent. Probably the culprit?
Tried straightening it with a sewing needle, but no luck. I think I could replace the socket without trouble, if I knew what to order.
Continuity is good all around -- but one of the pins in the PCB battery cable socket (6 pins, off-white) is bent. Probably the culprit?
Tried straightening it with a sewing needle, but no luck. I think I could replace the socket without trouble, if I knew what to order.