[FOR SALE] Safe Shutdown v1.2 (for PowerBoost)

[deeleyer]

Received!
Thank you!

[nickzick]

Also received, great stuff!

But I got a question after installing and having some problems. I installed the monitor script as explained on the website https://github.com/Camble/GBZ-Power-Monitor_PB

After removing the switch an shutting down retropie manually my gbz always gets a kernel panic. How do I remove all the installed things so that the kernel panic doesn't come again?
(Sorry for my bad english, hopefully someone understands my problems).

Thanks very much!

[derebbe]

After removing the switch an shutting down retropie manually my gbz always gets a kernel panic. How do I remove all the installed things so that the kernel panic doesn't come again?
(Sorry for my bad english, hopefully someone understands my problems).

Thanks very much!

you need to undo your changes in "/boot/config.txt"...

[Mischief]

Just wanted to say after using it for a while I have found no issues at all shuts down properly every time no matter what game I am playing and even when it's plugged into the charger.

Massive thanks to @Camble again for creating a great addition to the community

[panais]

There will be another release of this?

[Camble]

There will be another release of this?

Yes, probably in next month or so

[Moshiriously]

I'm also having the kernel panic issue. I removed the text in the config.txt but it's still doing it. Suggestions? It says something about trying to reboot as well, I may have accidentally added a reboot command into the script because after I installed everything I tried to do a reboot in the command prompt. Is there a way to uninstall the script and restart from scratch?

[Camble]

I'm also having the kernel panic issue. I removed the text in the config.txt but it's still doing it. Suggestions? It says something about trying to reboot as well, I may have accidentally added a reboot command into the script because after I installed everything I tried to do a reboot in the command prompt. Is there a way to uninstall the script and restart from scratch?

From the script directory, type:

Code: Select all

git pull origin master

[Treguard]

"Octagonal GND connects to the GND pin of the PowerBoost."

Does it need to go to that pin on the powerboost? I only ask as on Helder's AIO diagram, it has the powerstrip on the AIO going from GND on the powerboost to GND IN on the powerstrip.

https://cdn.discordapp.com/attachments/ ... Wiring.png

I didn't think the GND on the powerboost was meant for the powerboost to be grounding to the powerstrip though. Would've thought it should be GND OUT on the AIO board to GND on the powerboost

Thanks in advance

[Camble]

"Octagonal GND connects to the GND pin of the PowerBoost."

Does it need to go to that pin on the powerboost? I only ask as on Helder's AIO diagram, it has the powerstrip on the AIO going from GND on the powerboost to GND IN on the powerstrip.

https://cdn.discordapp.com/attachments/ ... Wiring.png

I didn't think the GND on the powerboost was meant for the powerboost to be grounding to the powerstrip though. Would've thought it should be GND OUT on the AIO board to GND on the powerboost

Thanks in advance

I have replied to your PM.

All share a common ground.