[For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Sell or trade things with other forum members!
User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: [For Sale]HoolyHoo's AIO bracket for Kite's SAIO Board

Post by HoolyHoo » Mon Oct 15, 2018 8:36 am

TechnoMario wrote:
Sat Oct 13, 2018 8:05 pm
Hi HoolyHoo! I ordered a screen bracket from you months ago when I first got in on the recent Circuit Sword group buy. It seems that Kite changed the status LED's on this new revision and now the [SMD] LED's shine out toward the front of the case rather than attaching through-hole LED's and having them shine out the top.

Your screen brackets block the newer SMD LED's and I'm curious if you plan on offering a new design to allow those LED's to shine through. It would require a notch in the other top corner of the bracket, similar to what you have on the power switch side. Kubino has made accommodating cuts for people on his pre-modified cases to support this. Borrowing some pics from other posts for examples below. I hadn't seen any other mention of this here, yet. If its in the works, I may hold out on the project until it becomes available... otherwise I will likely use my dremel to modify it or drill holes like the other user below.

https://i.imgur.com/1mCW6jK.jpg

https://imgur.com/a/tHPFtNS

https://sudomod.com/forum/viewtopic.php?p=61777#p61777
Yes, I believe he made this change a couple of boards ago. I have the board he first made this change to and the smd LED's will shine either through the top of the shell or the front depending where the holes are made in your shell and of course providing a bracket isn't blocking the lights. I don't have the very latest one of his boards in my hands but if its like the one you pictured in the first photo then I believe its still the same.

If you ordered one of my PSP brackets then there are holes already in the bracket to allow the led's to shine through the front of the shell if you made holes there similar to the ones in your posted photo. I have not applied this to any of the other brackets but I can do so if there is interest in that. If you have one of my brackets without the led holes then it can be easily modified by carefully drilling some holes on the top. Let me know if I can try to be of any further help.

Thanks :D

Operator
Posts: 2
Joined: Wed Feb 14, 2018 1:24 am
Has thanked: 1 time

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by Operator » Tue Oct 30, 2018 3:41 am

Hi Hoolyhoo, I've sent you a pm. :D

Kross64hero
Posts: 17
Joined: Thu Sep 27, 2018 5:43 pm
Has thanked: 1 time

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by Kross64hero » Tue Oct 30, 2018 9:13 am

Do you buy chance make a 3D printed **case** and bracket so I don't have to spend hours cutting up a GameBoy and I can drop in Kites board and go?

User avatar
KonnorJ
Posts: 385
Joined: Thu Jan 11, 2018 1:23 am
Location: United Kingdom
Has thanked: 58 times
Been thanked: 109 times
Contact:

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by KonnorJ » Tue Oct 30, 2018 5:15 pm

Kross64hero wrote:
Tue Oct 30, 2018 9:13 am
Do you buy chance make a 3D printed **case** and bracket so I don't have to spend hours cutting up a GameBoy and I can drop in Kites board and go?
Galaxy gaming sell pre cut shells as does kubino

Kross64hero
Posts: 17
Joined: Thu Sep 27, 2018 5:43 pm
Has thanked: 1 time

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by Kross64hero » Tue Oct 30, 2018 10:18 pm

Cheers

crealdocsnyder
Posts: 8
Joined: Mon Jun 18, 2018 2:29 am
Has thanked: 1 time
Been thanked: 3 times

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by crealdocsnyder » Sat Nov 03, 2018 5:51 am

Hi! I ordered a PSP style bracket a month ago (EU based).
Any updates available on that? I haven't heard anything back since then.

User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by HoolyHoo » Sat Nov 03, 2018 6:24 am

crealdocsnyder wrote:
Sat Nov 03, 2018 5:51 am
Hi! I ordered a PSP style bracket a month ago (EU based).
Any updates available on that? I haven't heard anything back since then.
Send me a PM with your name and PayPal address and I will see what’s going on. Thanks.

thejungleboy
Posts: 1
Joined: Tue Nov 13, 2018 9:06 am

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by thejungleboy » Tue Nov 13, 2018 9:16 am

Any chance of posting the PSP joystick style bracket file for printing? I could also be missing it...

User avatar
Hellweaver666
Posts: 62
Joined: Sun Aug 12, 2018 1:37 am
Has thanked: 16 times
Been thanked: 13 times

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by Hellweaver666 » Thu Nov 15, 2018 1:26 am

Hi HoolyHoo,

I recently completed a four button build using your screen bracket. I've self printed all the 3d printed parts in a glow in the dark white PLA that I love the look of through my transparent case. I'm really regretting the four button thing through and want to "upgrade" to a six button design. Is there any way I can "buy" access to the 6 button bracket STL files for self printing please?

BenOfTheNorth
Posts: 59
Joined: Sat Nov 12, 2016 12:26 pm
Has thanked: 52 times
Been thanked: 9 times

Re: [For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Post by BenOfTheNorth » Sat Nov 17, 2018 7:14 am

Just collected mine today from the post office - its great, thanks!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest