[For Sale, Preorder] DMG pre-cut cases

Sell or trade things with other forum members!
kubino
Posts: 205
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 150 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by kubino » Fri Jul 06, 2018 4:44 am

Finaly was able to play with 640screen. Here is what I was able to get :
IMG_20180706_123730.jpg
IMG_20180706_123730.jpg (2.67 MiB) Viewed 2578 times
IMG_20180706_123623.jpg
IMG_20180706_123623.jpg (3.46 MiB) Viewed 2578 times
IMG_20180706_123553.jpg
IMG_20180706_123553.jpg (3.67 MiB) Viewed 2578 times
Left side of the shell is shaved 1.6mm and small part under volume wheel is almost transparent, but still looking good when screen is installed ;-)

On the right side was enought 0.6mm

timemaster
Posts: 35
Joined: Fri May 05, 2017 1:00 am
Location: UK
Has thanked: 4 times
Been thanked: 12 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by timemaster » Fri Jul 06, 2018 5:04 am

Hi Kubino, this is exactly what I need :) ready to prepare two cases for me? I'll send you PM :)
Haven't you checked compatibility with "our" 640x480 bracket? https://sudomod.com/forum/viewtopic.php?f=58&t=6088
it should work well, there are no more options where the display can be slipped. I can update that design to be more precise if you find anything...

kubino
Posts: 205
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 150 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by kubino » Fri Jul 06, 2018 5:19 am

timemaster wrote:
Fri Jul 06, 2018 5:04 am
Hi Kubino, this is exactly what I need :) ready to prepare two cases for me? I'll send you PM :)
Haven't you checked compatibility with "our" 640x480 bracket? https://sudomod.com/forum/viewtopic.php?f=58&t=6088
it should work well, there are no more options where the display can be slipped. I can update that design to be more precise if you find anything...
If you followed geometry from my bracket then vertical side should be OK, but for horizontal part there would be still some pixels missing on the right of the screen.

timemaster
Posts: 35
Joined: Fri May 05, 2017 1:00 am
Location: UK
Has thanked: 4 times
Been thanked: 12 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by timemaster » Fri Jul 06, 2018 7:38 am

kubino wrote:
Fri Jul 06, 2018 5:19 am
timemaster wrote:
Fri Jul 06, 2018 5:04 am
Hi Kubino, this is exactly what I need :) ready to prepare two cases for me? I'll send you PM :)
Haven't you checked compatibility with "our" 640x480 bracket? https://sudomod.com/forum/viewtopic.php?f=58&t=6088
it should work well, there are no more options where the display can be slipped. I can update that design to be more precise if you find anything...
If you followed geometry from my bracket then vertical side should be OK, but for horizontal part there would be still some pixels missing on the right of the screen.
Hmm, and there is no more space in the wall to cut out, right? What about cut through and then place some kind of cover over the hole filled with the display? I know, horrible idea but it depends on the cover design I think.
Last edited by timemaster on Fri Jul 06, 2018 7:44 am, edited 1 time in total.

kubino
Posts: 205
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 150 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by kubino » Fri Jul 06, 2018 7:42 am

I'm affraid no space. The only possibility is to cut from the screen as described in wiki. If you insist I can do the hole throught the case but I dont think it will look nice ;-)

timemaster
Posts: 35
Joined: Fri May 05, 2017 1:00 am
Location: UK
Has thanked: 4 times
Been thanked: 12 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by timemaster » Fri Jul 06, 2018 7:49 am

I will try that on some of my damaged cases later:) I am still thinking about covering that hole some easy way like with some sticker, thicker in its center with the exact size of that hole... But now I am completedly without tools as I wrote in different thread :(

FireFoxGR
Posts: 25
Joined: Wed Apr 26, 2017 6:11 am
Has thanked: 32 times
Been thanked: 8 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by FireFoxGR » Fri Jul 06, 2018 2:37 pm

Hello guys, I got some measurements for the 640x480 screen, hopefully it will be useful to some of you..

So I cut the screen following the directions from Kite. The result is this:
total.jpg
total.jpg (394.71 KiB) Viewed 2502 times
the total width is ~83mm

I tried to put this with kubino's bracket directly on the front of the case. This is what we are missing from the sides:
Left
photoLeft.png
photoLeft.png (1.07 MiB) Viewed 2502 times
Right
photoRight.png
photoRight.png (762.53 KiB) Viewed 2502 times
Up and down sides are placed more or less OK.

What does this mean :?:

With the cut from Kubino we can have near perfect fit on the left side and lose ~1mm on the right side but without using overscan settings :)

Unfortunately to get the best results a cut on the screen would be needed.. be extra careful!

Cheers

kubino
Posts: 205
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 150 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by kubino » Thu Jul 19, 2018 2:15 pm

This was quite requested cut, so here you go :-)
IMG_20180719_220755.jpg
IMG_20180719_220755.jpg (2.89 MiB) Viewed 2360 times

teapot
Posts: 1
Joined: Sat Jul 14, 2018 3:16 am
Has thanked: 4 times
Been thanked: 1 time

Re: [For Sale, Preorder] DMG pre-cut cases

Post by teapot » Tue Aug 07, 2018 12:21 pm

Just received a case from Kubino in the post today - as everyone has already said, excellent work :)

kubino
Posts: 205
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 150 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by kubino » Thu Aug 09, 2018 2:00 am

Battery cleanup on original shell:

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest