[For Sale] Kite's Shoulder Board Bracket (Free STL)

Sell or trade things with other forum members!
User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by erik_gee » Mon Feb 26, 2018 11:12 pm

epicpwn wrote:
Mon Feb 26, 2018 6:00 pm
Nice work with the brackets and the STL! Love that you're sharing the model also.

Do you have any pictures (rear and inside) of this installed with the buttons in place?
These pictures are not my own, they are from someone else who has installed

Image
Image
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

User avatar
Sesambrötchen
Posts: 15
Joined: Mon Sep 26, 2016 10:10 am
Location: Germany
Has thanked: 4 times
Been thanked: 10 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by Sesambrötchen » Tue Feb 27, 2018 1:12 pm

Hey,

does Kites bracket has the same distance between the buttons as your bracket?

User avatar
epicpwn
Posts: 47
Joined: Tue Sep 20, 2016 12:38 pm
Has thanked: 33 times
Been thanked: 9 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by epicpwn » Tue Feb 27, 2018 1:34 pm

Kite has a button bracket?
Sesambrötchen wrote:
Tue Feb 27, 2018 1:12 pm
Hey,

does Kites bracket has the same distance between the buttons as your bracket?

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by erik_gee » Tue Feb 27, 2018 1:57 pm

Sesambrötchen wrote:
Tue Feb 27, 2018 1:12 pm
Hey,

does Kites bracket has the same distance between the buttons as your bracket?
They aren't exact but they are similar enough to work. As I stated on the op, this one is just a slightly modified version of my own. Those slight modifications we're mainly designing new side pieces, as my originally ones may be hard for people to print. And an adjustment to the center screw post as mine are slightly lower than his. However, I did discuss with kite about adjust the shape of his board slightly to allow for a better fit. He may be making some adjustments to future boards, and if he does, I have a better fitting bracket ready to go for it :)
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

sygyzy
Posts: 191
Joined: Tue Sep 05, 2017 12:45 pm
Has thanked: 52 times
Been thanked: 32 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by sygyzy » Wed Feb 28, 2018 2:34 pm

erik_gee wrote:
Mon Feb 26, 2018 11:12 pm
Image
What are the two white rubbery looking pieces sticking out at the top of each button? Is it the conductive membrane? I thought it was supposed to be trimmed? Thanks.

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by erik_gee » Wed Feb 28, 2018 8:52 pm

sygyzy wrote:
Wed Feb 28, 2018 2:34 pm
erik_gee wrote:
Mon Feb 26, 2018 11:12 pm
Image
What are the two white rubbery looking pieces sticking out at the top of each button? Is it the conductive membrane? I thought it was supposed to be trimmed? Thanks.
Yup it's the membrane. I go into trimming it in more detail in my other thread. But what you do is cut it in half, so it's just the 2 circles, and then you trim off the little lip that outlines the part. Don't remove the peg guide though because it help align it and keep it in place. You can if you want to, there is enough pressure to keep it in place. But I just thought it would be easier with the pegs
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

sygyzy
Posts: 191
Joined: Tue Sep 05, 2017 12:45 pm
Has thanked: 52 times
Been thanked: 32 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by sygyzy » Thu Mar 01, 2018 11:28 am

Oh this is really helpful. I will check out the other thread and your videos. I don't have all the pieces in hand yet so it's kind of difficult (for me) to picture everything. I just want to get ready before installing!

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by erik_gee » Thu Mar 01, 2018 12:14 pm

No problem. If you have any questions post back here, that way it can help others who may have similar questions 👍
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

nicesocks
Posts: 6
Joined: Sat Feb 10, 2018 8:29 pm

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by nicesocks » Sat Mar 03, 2018 4:12 pm

I'm still waiting for my parts to get here so i can't tell: is this bracket a requirement for holding Kite's back button pcb board in place?

Is this a need to have or a nice to have? I don't want to wait 4 more weeks for my china shipments to get here only to find out I still need to order something like this.

Thanks

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [For Sale] Kite's Shoulder Board Bracket (Free STL)

Post by erik_gee » Sat Mar 03, 2018 8:35 pm

nicesocks wrote:
Sat Mar 03, 2018 4:12 pm
I'm still waiting for my parts to get here so i can't tell: is this bracket a requirement for holding Kite's back button pcb board in place?

Is this a need to have or a nice to have? I don't want to wait 4 more weeks for my china shipments to get here only to find out I still need to order something like this.

Thanks
If you want to use kite's backboard, then you will NEED a way to hold the board in place. It can't be used on its own as nothing is there to hold it. You can maybe hold it in some other way, but I wouldn't know how. So I'd say this is a need if you wish to use his back board
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest