[FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Sell or trade things with other forum members!
User avatar
HoolyHoo
Posts: 725
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 720 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by HoolyHoo » Wed Aug 29, 2018 11:47 am

BradD wrote:
Wed Aug 29, 2018 11:44 am
Yeah, I went through the gamepad detection routine and it recognized everything except L1 and R1.
Ok, I would suggest to test continuity on the buttons with a MM. You can also try changing the two connections on Kite's daughterboard to verify a button issue.

BradD
Posts: 5
Joined: Thu Apr 06, 2017 2:48 pm
Been thanked: 1 time

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by BradD » Fri Aug 31, 2018 12:40 am

So I checked all my solder connections and checked the switches with a multimeter. It seems like the board isn't accepting input on both yellow wires. I even tried shorting L1 to ground on the board with the buttons.

User avatar
HoolyHoo
Posts: 725
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 720 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by HoolyHoo » Fri Aug 31, 2018 12:48 am

BradD wrote:
Fri Aug 31, 2018 12:40 am
So I checked all my solder connections and checked the switches with a multimeter. It seems like the board isn't accepting input on both yellow wires. I even tried shorting L1 to ground on the board with the buttons.
So if you tried shorting the yellow wires (L1, R1) to ground bypassing the buttons, then there must be an issue with the connectors leading to the daughter board. Make sure the pins weren’t bent and are making the connection. Did you try swapping the connectors?

BradD
Posts: 5
Joined: Thu Apr 06, 2017 2:48 pm
Been thanked: 1 time

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by BradD » Fri Aug 31, 2018 11:51 am

How do you swap connectors? One is three pin and one is six.

User avatar
HoolyHoo
Posts: 725
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 720 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by HoolyHoo » Fri Aug 31, 2018 12:44 pm

BradD wrote:
Fri Aug 31, 2018 11:51 am
How do you swap connectors? One is three pin and one is six.
Oh yes sorry about that. That won’t work then. Basically as you said you need to short the ground and the button pin wires. If it’s not working then the connector on the daughterboard is not making good connection.

User avatar
RazzleDazzle
Posts: 5
Joined: Tue Oct 09, 2018 6:14 pm
Location: Switzerland
Been thanked: 1 time

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by RazzleDazzle » Wed Oct 10, 2018 3:29 pm

Just ordered a PCB, thx for providing such great products...:mrgreen:

No Hands 55
Posts: 22
Joined: Thu Oct 04, 2018 2:53 pm
Has thanked: 9 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by No Hands 55 » Tue Oct 30, 2018 12:08 am

would you guys say this a more comfortable/natural layout than the 4 big buttons?
SuperGameGirl Build:
https://imgur.com/a/KuBRE

dwhacks
Posts: 1
Joined: Wed Oct 10, 2018 1:09 pm
Been thanked: 1 time

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by dwhacks » Wed Nov 21, 2018 9:06 pm

I just got mine in the mail today and installed it right away! It was super easy and fits great. I've never tried any other back buttons so I don't have anything to compare to, but these ones are amazing. The soft buttons are SO MUCH nicer then the standard tact buttons. I Printed the HoolyHoo screen bracket and when I saw this forsale, I thought it would be a great way to say a little thanks.

Great work! super stoked on my build!

sandog
Posts: 111
Joined: Fri Oct 26, 2018 8:17 pm
Has thanked: 9 times
Been thanked: 6 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by sandog » Fri Dec 14, 2018 5:39 am

Does anyone sell the on/off, USB board and fan mount like in the picture without buying kites board?

sandog
Posts: 111
Joined: Fri Oct 26, 2018 8:17 pm
Has thanked: 9 times
Been thanked: 6 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by sandog » Thu Jan 03, 2019 1:26 pm

Is there a templet for drilling the holes?

Post Reply

Who is online

Users browsing this forum: Google Adsense [Bot], julian9316 and 1 guest