sudomod

DieselDummy wrote: ↑

Tue Apr 30, 2019 11:13 pm

Ordered one. Do you have a link to a preferred battery?

Thank you for the order.
I used this:https://www.aliexpress.com/item/Good-Qu ... Title=true
But you can use any 3.7V lithium battery with maximum sizes 4.5x50x80mm

I bought this one, to get the full 4.5x50x80mm size, 2500 mah.

https://www.ebay.ca/itm/2-x-2500mAh-3-7 ... 2749.l2649

rodocop wrote: ↑

Wed May 01, 2019 11:46 am

I bought this one, to get the full 4.5x50x80mm size, 2500 mah.

https://www.ebay.ca/itm/2-x-2500mAh-3-7 ... 2749.l2649

Yes, I used such a battery. It is suitable for Picicle.

At the request of buyers, I share the drawings of the case. https://drive.google.com/open?id=1ZeeuZ ... zghz0Jvz6N
This is done by milling. After glueing the laser cutting acrile may crack.

I might have missed it - but

Is it possible to play while charging?

and soldering the zero to the board, making sure I have understood correctly:
- no pins, wire or similar is used? The board is aligned with two pins, solder is heated on the pi side and melts into the hole and makes the connection to the board?

can't wait to receive it, looks well thought out.

regards
Bo

djboa wrote: ↑

Thu May 09, 2019 6:59 am

Is it possible to play while charging?

Yes, it's possible. In the next version of the manual I add it.

djboa wrote: ↑

Thu May 09, 2019 6:59 am

and soldering the zero to the board, making sure I have understood correctly:
- no pins, wire or similar is used? The board is aligned with two pins, solder is heated on the pi side and melts into the hole and makes the connection to the board?

Yes, you understood everything correctly.
I will try to make a video instruction as quickly as a possible.

Thanks for the quick reply, if you are doing a video, would you mind also doing one showing it of a bit?

djboa wrote: ↑

Thu May 09, 2019 10:32 am

Thanks for the quick reply, if you are doing a video, would you mind also doing one showing it of a bit?

The video is available, but I do not like it. I will be record again. There is a moment with soldering Raspberry PI Zero W: https://drive.google.com/open?id=1ltmWD ... aPDK1IC0cE

Perfect, that looks like something I can do

Is it possible for me to use a normal pi zero? I've got a spare and tempted to use it on this project