[FOR SALE] Finished Gameboy Zero - Wermy style - Upgraded 640x480 Screen - $300
Posted: Thu Aug 08, 2019 6:58 pm
Selling my complete Gameboy Zero. Based on Wermy's youtube videos with a few adjustments/upgrades.
Pictures:
https://imgur.com/a/G1eJ9
Everything works great, no damage in construction. Buttons can feel a little mushy, I think it's because of the larger speaker I tried to cram in there. So the PCB doesn't sit exactly where it should. You can easily swap it out.
Not sure price wise, parts cost me around $300. I'll let it go for $300 plus shipping. Probably around $10 to ship this.
Let me know if you have any questions. Happy to take more pictures.
Highlights
Raspberry Pi Zero - RetroPi Installed
All-in-one button PCB from Helder
640x480 screen
Safe-shutdown board
2500 mAh Lithium Ion Polymer Battery from Adafruit
PowerBoost 1000C battery charger/5V boost from Adafruit
Gorilla Glass Screen Cover
Full parts list:
Aftermarket cartridge shell from kitsch-bent
White NES-style buttons from kitsch-bent for X/Y buttons
Green buttons/d-pad from handheld-legend
Rubber button pads from ebay
microB USB Breakout board from SparkFun
JST battery extension cable from Adafruit
9mm tactile switches
Volume wheel from ebay (not *quite* as thick as the original wheel, but close)
PJ325 headphone jack from ebay
Micro-SD card cartridge adaptor from prerunnerseth
USB port
DS-Lite GBA cartridge readers from ebay
Cartridge label from Dominator
Empty aftermarket cartridge from kitsch-bent
Screen cover from Dominator
3D-Printed screw bracket by wermy
3D-Printed button wells by wermy
A power-switch brace: market.sudomod.com/3d-printed-power-switch-brace
A DS-Lite GBA cartridge slot mount: market.sudomod.com/3d-printed-dsl-gba-cartridge-slot-mount
Pictures:
https://imgur.com/a/G1eJ9
Everything works great, no damage in construction. Buttons can feel a little mushy, I think it's because of the larger speaker I tried to cram in there. So the PCB doesn't sit exactly where it should. You can easily swap it out.
Not sure price wise, parts cost me around $300. I'll let it go for $300 plus shipping. Probably around $10 to ship this.
Let me know if you have any questions. Happy to take more pictures.
Highlights
Raspberry Pi Zero - RetroPi Installed
All-in-one button PCB from Helder
640x480 screen
Safe-shutdown board
2500 mAh Lithium Ion Polymer Battery from Adafruit
PowerBoost 1000C battery charger/5V boost from Adafruit
Gorilla Glass Screen Cover
Full parts list:
Aftermarket cartridge shell from kitsch-bent
White NES-style buttons from kitsch-bent for X/Y buttons
Green buttons/d-pad from handheld-legend
Rubber button pads from ebay
microB USB Breakout board from SparkFun
JST battery extension cable from Adafruit
9mm tactile switches
Volume wheel from ebay (not *quite* as thick as the original wheel, but close)
PJ325 headphone jack from ebay
Micro-SD card cartridge adaptor from prerunnerseth
USB port
DS-Lite GBA cartridge readers from ebay
Cartridge label from Dominator
Empty aftermarket cartridge from kitsch-bent
Screen cover from Dominator
3D-Printed screw bracket by wermy
3D-Printed button wells by wermy
A power-switch brace: market.sudomod.com/3d-printed-power-switch-brace
A DS-Lite GBA cartridge slot mount: market.sudomod.com/3d-printed-dsl-gba-cartridge-slot-mount