Safe Shutdown v2.0

If you'd like to gauge interest in an idea before putting it into production, do it here!

Interested in Safe Shutdown v2.0 with battery monitoring?

Yes
32
84%
No
1
3%
Maybe
5
13%
 
Total votes: 38

User avatar
infinitLoop
Posts: 536
Joined: Mon Dec 24, 2018 11:46 am
Location: Portland, OR
Has thanked: 222 times
Been thanked: 199 times
Contact:

Re: Safe Shutdown v2.0

Post by infinitLoop » Fri Feb 08, 2019 10:32 am

VeteranGamer wrote:
Thu Feb 07, 2019 3:00 am
Camble wrote:
Wed Feb 06, 2019 1:29 pm
The switch for the PowerBoost edition should work with your PSU to initiate a shutdown
is this the current powerboost edition board
and if so...
any idea how this should be wired up.....
(if it is,its just the LBO, that is throwing me off)


or this going to be the case for the new revisions....
yeah, i ditched it on my recent build too since it wasn't obvious how to hook it up, but figured the psu battery monitor was good enough, with a tactile switch to the gpio to trigger a safe s/d. it would be nice to have that switch to do the powerdown instead, and save that extra bit.

User avatar
Camble
Posts: 885
Joined: Thu May 05, 2016 2:31 am
Location: Scotland
Has thanked: 269 times
Been thanked: 488 times

Re: Safe Shutdown v2.0

Post by Camble » Sat Feb 09, 2019 11:49 am

VeteranGamer wrote:
Thu Feb 07, 2019 3:00 am
is this the current powerboost edition board
and if so...
any idea how this should be wired up.....
(if it is,its just the LBO, that is throwing me off)
This is the Generic/BangGood one but I would also like to replace LBO on the PowerBoost edition with an ADS1015

Ziploc99
Posts: 36
Joined: Sun Jun 17, 2018 10:02 am
Has thanked: 26 times
Been thanked: 11 times

Re: Safe Shutdown v2.0

Post by Ziploc99 » Tue Feb 26, 2019 8:42 am

I think what Veteran is saying, is a way to simplify the below image. Merlin worked out a way to add an ads1105 with your Safe Shutdown board. That way he had batt monitoring and changed the script so the safe shutdown triggered with flipping the switch. I would also be interested in this as it nice to have that shutdown script on demand at the switch (not a separate button/combo of buttons). Ignoring all the other parts of this diagram (helder pcb, screen, sd card), something that incorporates the shutdown pcb, ads and powerboost like this:
Attachments
IMG_0822.JPG
IMG_0822.JPG (939.23 KiB) Viewed 33169 times

User avatar
Keroxieee68
Posts: 4
Joined: Fri May 07, 2021 12:04 pm
Location: Tokyo
Has thanked: 1 time

Re: Safe Shutdown v2.0

Post by Keroxieee68 » Fri May 07, 2021 12:10 pm

I found it on googling. I have a Game Boy zero project right now. I'm very very interested with it. I would like this, but do you have it in stock?

ben8763
Posts: 2
Joined: Sat Jun 08, 2019 7:37 pm

Re: Safe Shutdown v2.0

Post by ben8763 » Tue Aug 31, 2021 6:22 pm

Did this go ahead?

Chiklette
Posts: 6
Joined: Thu Jul 08, 2021 1:09 am
Has thanked: 2 times

Re: Safe Shutdown v2.0

Post by Chiklette » Mon Oct 18, 2021 8:57 am

Yep, I'd also like to know if this ever went throught?
I'm using tp4056 and mt3608 from AliExpress as power post.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest