Not only it requires more power, banana pi need also active coolinglukesky333 wrote: ↑Thu Oct 11, 2018 8:14 amIs it possible to use a Banana Pi Zero instead of a Raspberry Pi Zero? It should have the same size but a lot more power?
I've one more question:
I try to order all needed parts for the PCB. Is it needed, that the resistors have a tolerance of 0.1%? I'm from Europe and an order from Digikey is very expensive. Is it possible to get all these parts from Aliexpress too?
Gaboze Pocaio
-
- Posts: 75
- Joined: Tue May 29, 2018 6:47 am
- Location: Usa
- Has thanked: 14 times
- Been thanked: 13 times
- Contact:
Re: Gaboze Pocaio
-
- Posts: 5
- Joined: Thu Oct 11, 2018 8:09 am
Re: Gaboze Pocaio
Thanks for the info...
I've another question:
Has anybody a actual shopping list for aliexpress? Digiverse orders Austria are to expensive so I want to order the parts from aliexpress. I've found a lot, but I need suggestions for the Micro-USB-connector and the battery.
I've another question:
Has anybody a actual shopping list for aliexpress? Digiverse orders Austria are to expensive so I want to order the parts from aliexpress. I've found a lot, but I need suggestions for the Micro-USB-connector and the battery.
- YaYa
- Posts: 1719
- Joined: Mon Jun 26, 2017 12:42 pm
- Location: brittany - France
- Has thanked: 871 times
- Been thanked: 689 times
- Contact:
Re: Gaboze Pocaio
Hello sudoers !
Just to let you know that i did a small batch of stickers for the GABOZE to have something custom into your hands.
The link to the product page https://yaya-design.com/index.php/categ ... een-detail
Just to let you know that i did a small batch of stickers for the GABOZE to have something custom into your hands.
The link to the product page https://yaya-design.com/index.php/categ ... een-detail
-
- Posts: 5
- Joined: Thu Oct 11, 2018 8:09 am
Re: Gaboze Pocaio
Hi,
the WIKI is offline - why? I've ordered all parts and need now further instructions from the wiki.
Please help me!!!
the WIKI is offline - why? I've ordered all parts and need now further instructions from the wiki.
Please help me!!!
-
- Posts: 5
- Joined: Thu Oct 11, 2018 8:09 am
Re: Gaboze Pocaio
Ok, I've found it... The project was renamed, so no link was working anymore.lukesky333 wrote: ↑Wed Dec 05, 2018 8:55 amHi,
the WIKI is offline - why? I've ordered all parts and need now further instructions from the wiki.
Please help me!!!
Wiki
-
- Posts: 1
- Joined: Tue Dec 11, 2018 6:34 pm
Re: Gaboze Pocaio
hello, i am new here....and new on pi zero
i have one question - can i use another TFT display?
I want to fit inside pocket 2.8" 640X480 TFT display with 60+ fps marked as MZDPI_VGA_ZERO.
This display have better resolution and maybe better colors.
is possible to use it with some wiring?
i have one question - can i use another TFT display?
I want to fit inside pocket 2.8" 640X480 TFT display with 60+ fps marked as MZDPI_VGA_ZERO.
This display have better resolution and maybe better colors.
is possible to use it with some wiring?
- VeteranGamer
- Posts: 1738
- Joined: Thu Jan 26, 2017 11:12 am
- Location: London, UK
- Has thanked: 528 times
- Been thanked: 909 times
Re: Gaboze Pocaio
short anwser.....CornholioGSM wrote: ↑Tue Dec 11, 2018 6:50 pmhello, i am new here....and new on pi zero
i have one question - can i use another TFT display?
I want to fit inside pocket 2.8" 640X480 TFT display with 60+ fps marked as MZDPI_VGA_ZERO.
This display have better resolution and maybe better colors.
is possible to use it with some wiring?
NO
that screen uses DPI, and this build/project uses SPI
(completely different wiring/setup)
.
-
- Posts: 5
- Joined: Thu Oct 11, 2018 8:09 am
Re: Gaboze Pocaio
I can't find the image for the GABOZE Pocaio anymore... Please give me the link to the image for installation....
Thanks!
Thanks!
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: Gaboze Pocaio
hmm, can't seem to find one for the original Gaboze, might have to make your own, see the links. Use a base 4.4 image.lukesky333 wrote: ↑Wed Jan 16, 2019 6:38 amI can't find the image for the GABOZE Pocaio anymore... Please give me the link to the image for installation....
Thanks!
Screen set up:
https://github.com/32teeth/GabozePocaio ... FT-Display
PWM audio setup:
https://github.com/32teeth/GabozePocaio ... M-Settings
Button setup:
Install retrogame using adafruits guide, and then see the proper values to add to the retroarch.cfg
https://github.com/32teeth/GabozePocaio ... 8Manual%29
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
Re: Gaboze Pocaio
Not sure if this is the best place to post this (necro necro necro lol)
So I finally decided to order more parts and build the round 2 boards (PCBs been sitting there a while).
Had a look on Aliexpress for the LCD and I can't find any listings of the 51 pin LCD around anymore!
Anyone have any leads on the LCD? Or is there a way to get the 30-something pin ones (seems like 36,37,38 pin variants) working on the board?
I also have the Pocket FE boards waiting to be built (yeah *finally* got the stuff like over a year later... ha - I think they use the same LCDs too =/)
So I finally decided to order more parts and build the round 2 boards (PCBs been sitting there a while).
Had a look on Aliexpress for the LCD and I can't find any listings of the 51 pin LCD around anymore!
Anyone have any leads on the LCD? Or is there a way to get the 30-something pin ones (seems like 36,37,38 pin variants) working on the board?
I also have the Pocket FE boards waiting to be built (yeah *finally* got the stuff like over a year later... ha - I think they use the same LCDs too =/)
Who is online
Users browsing this forum: No registered users and 1 guest