Gaboze Pocaio
Re: Gaboze Pocaio
I had a question about the board. It looks like the screen on mine is off by ~2 mm from left to right with a noticeable slant when looking at it straight on. How is the screen attached and can I easily reseat the screen or will I break something if I try to remove it? Any thoughts?
Thanks
Thanks
-
- Posts: 75
- Joined: Tue May 29, 2018 6:47 am
- Location: Usa
- Has thanked: 14 times
- Been thanked: 13 times
- Contact:
Re: Gaboze Pocaio
edit the offset settings in /boot/config.txtZiploc99 wrote: ↑Tue Jul 31, 2018 10:19 pmI had a question about the board. It looks like the screen on mine is off by ~2 mm from left to right with a noticeable slant when looking at it straight on. How is the screen attached and can I easily reseat the screen or will I break something if I try to remove it? Any thoughts?
Thanks
-
- Posts: 75
- Joined: Tue May 29, 2018 6:47 am
- Location: Usa
- Has thanked: 14 times
- Been thanked: 13 times
- Contact:
Re: Gaboze Pocaio
Hello, I just assembled my gaboze pocaio and I made this drill hole helper, since I did not wanted to drill over the pcb (since I did not had an 1mm drill), thanks for making the project opensource!
https://www.thingiverse.com/thing:3124877
https://www.thingiverse.com/thing:3124877
- KonnorJ
- Posts: 385
- Joined: Thu Jan 11, 2018 1:23 am
- Location: United Kingdom
- Has thanked: 58 times
- Been thanked: 109 times
- Contact:
Re: Gaboze Pocaio
Yeah these were sold a while back now, for pocket builds now your options would be, the pocket pi Fe kit by galaxy gaming, they recently did a thread here or you can check their site, or, ordering blank gaboze PCBs, then ordering the BOM and assembling by hand.
Re: Gaboze Pocaio
No worries! I ordered two of the kits from GalaxyGaming, just waiting on the shipment now. Thanks for the reply!KonnorJ wrote: ↑Sat Sep 29, 2018 3:18 amYeah these were sold a while back now, for pocket builds now your options would be, the pocket pi Fe kit by galaxy gaming, they recently did a thread here or you can check their site, or, ordering blank gaboze PCBs, then ordering the BOM and assembling by hand.
-
- Posts: 5
- Joined: Thu Oct 11, 2018 8:09 am
Re: Gaboze Pocaio
Is it possible to use a Banana Pi Zero instead of a Raspberry Pi Zero? It should have the same size but a lot more power?
I've one more question:
I try to order all needed parts for the PCB. Is it needed, that the resistors have a tolerance of 0.1%? I'm from Europe and an order from Digikey is very expensive. Is it possible to get all these parts from Aliexpress too?
I've one more question:
I try to order all needed parts for the PCB. Is it needed, that the resistors have a tolerance of 0.1%? I'm from Europe and an order from Digikey is very expensive. Is it possible to get all these parts from Aliexpress too?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: Gaboze Pocaio
Yes, tolerance isn't too important for these.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest