Gaboze Pocaio

If you'd like to gauge interest in an idea before putting it into production, do it here!
32teeth

Re: Gaboze Pocaio

Post by 32teeth » Mon Jun 04, 2018 8:28 am

xfx9500 wrote:
Sun Jun 03, 2018 11:50 am
i made on of your awesome boards myself :)
but when i power it up with your image is the screen upside down :(
It's in the Wiki

xfx9500
Posts: 8
Joined: Sun May 06, 2018 12:11 pm
Has thanked: 1 time

Re: Gaboze Pocaio

Post by xfx9500 » Tue Jun 05, 2018 4:03 am

thank you now it works fine :)

sygyzy
Posts: 191
Joined: Tue Sep 05, 2017 12:45 pm
Has thanked: 52 times
Been thanked: 33 times

Re: Gaboze Pocaio

Post by sygyzy » Tue Jun 05, 2018 11:40 am

Hi great job on this. A question and a comment - what is the best way to reach you? It seems like you have a presence at many places (Github, YouTube, Facebook, here, etc) but I don't know what your preferred communication method is. I don't want to message you here, but you may never login to check. I have a question about your battery recommendation. Since different manufacturers make 2000mAh batteries and Adafruit's stock levels change, can you post the maximum dimensions of a battery that will comfortably fit in the Gameboy cartridge shell, in mm? Thanks.

Second, the link to the BOM in the original post should be updated to: https://github.com/GameboyZero/GabozePo ... Pociao.csv

xfx9500
Posts: 8
Joined: Sun May 06, 2018 12:11 pm
Has thanked: 1 time

Re: Gaboze Pocaio

Post by xfx9500 » Sun Jun 10, 2018 6:02 am

i flashed your latest image from the wiki site but the buttons are not working :(
how can i fix this ? :|

User avatar
rodocop
Posts: 1723
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 606 times
Been thanked: 608 times

Re: Gaboze Pocaio

Post by rodocop » Mon Jun 11, 2018 11:33 am

xfx9500 wrote:
Sun Jun 10, 2018 6:02 am
i flashed your latest image from the wiki site but the buttons are not working :(
how can i fix this ? :|
Re flash it again? ensure the button pads are making good contact, and check that all the pi gpio connections are soldered good. It should just work.

xfx9500
Posts: 8
Joined: Sun May 06, 2018 12:11 pm
Has thanked: 1 time

Re: Gaboze Pocaio

Post by xfx9500 » Tue Jun 12, 2018 9:01 am

i flash the mintyPi image for exempel the buttons are working :O
when i flash the Gaboze Pocaio uncompressed image none of the buttons working :(

and i test my pcb half an hour and i found no solder mistakes :(

32teeth

Re: Gaboze Pocaio

Post by 32teeth » Wed Jun 13, 2018 12:25 pm

xfx9500 wrote:
Tue Jun 12, 2018 9:01 am
i flash the mintyPi image for exempel the buttons are working :O
when i flash the Gaboze Pocaio uncompressed image none of the buttons working :(

and i test my pcb half an hour and i found no solder mistakes :(
Any pics?
It's hard to remedy without visual

Jfenton78
Posts: 26
Joined: Thu Aug 24, 2017 7:40 am
Has thanked: 3 times
Been thanked: 1 time

Re: Gaboze Pocaio

Post by Jfenton78 » Fri Jul 06, 2018 8:05 am

It appears from a number of screenshots that the 2.4" screen is smaller that the GB Pockets viewing area. Is it possible use a 2.8" screen and fill the viewable area and will a 2.8" screen fit the GB Pocket? Any recommendations on what 2.8" screen can be swapped onto the Gaboze Pocaio?

jeff

Stek692003
Posts: 21
Joined: Mon May 29, 2017 4:54 pm
Has thanked: 7 times
Been thanked: 1 time

Re: Gaboze Pocaio

Post by Stek692003 » Fri Jul 20, 2018 8:01 am

Hi

Does anyone have the pin out for this board?

My A button isn't working so trying to find out which pin I need to check to see if my soldering is correct.

I'm also thinking of adding some buttons to the back of the case so could do with the pins assigned to R1/L1 aswell.

Thanks


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest