GBZ Guide Part 3 is up!

General GBZ-related chat goes here. Share ideas, tips and tricks, or ask questions that don't fit into the hardware/software help forums.
Post Reply
User avatar
wermy
Site Admin
Posts: 1340
Joined: Tue May 03, 2016 8:51 pm
Has thanked: 609 times
Been thanked: 1317 times
Contact:

GBZ Guide Part 3 is up!

Post by wermy » Tue May 10, 2016 10:45 pm

ImageImageImageImage

hummerh1
Posts: 4
Joined: Thu May 05, 2016 8:06 pm

Re: GBZ Guide Part 3 is up!

Post by hummerh1 » Tue May 10, 2016 10:55 pm

Great tutorial wermy! You are awesome! :lol:

Retrohead95
Posts: 80
Joined: Thu May 05, 2016 6:00 pm
Has thanked: 3 times
Been thanked: 4 times

Re: GBZ Guide Part 3 is up!

Post by Retrohead95 » Tue May 10, 2016 11:05 pm

Loved the guide @wermy. Your soldering iron makes soldering look effortless and gets the job done in a breeze. Would you mind sharing what soldering iron, solder and soldering tools you're using?

ktechelonbreak
Posts: 78
Joined: Wed May 04, 2016 10:07 pm
Been thanked: 7 times

Re: GBZ Guide Part 3 is up!

Post by ktechelonbreak » Tue May 10, 2016 11:26 pm

Thank you for the guide wermy. I was wondering how I'd end up getthing those screw posts in. No Epoxy on hand or the metal bracket, time to take a trip to the store!

choochootrain23
Posts: 9
Joined: Sun May 08, 2016 8:13 pm
Has thanked: 1 time
Been thanked: 2 times

Re: GBZ Guide Part 3 is up!

Post by choochootrain23 » Tue May 10, 2016 11:36 pm

Awesome! :D

Thatbraziliann
Posts: 97
Joined: Wed May 04, 2016 10:04 pm
Has thanked: 4 times
Been thanked: 2 times

Re: GBZ Guide Part 3 is up!

Post by Thatbraziliann » Tue May 10, 2016 11:52 pm

Is anyone using the nice shopping display? does the red and white cables go in the same place @wermy set his in?

yves1984
Posts: 85
Joined: Thu May 05, 2016 7:55 am
Location: Zürich (Switzerland)
Has thanked: 13 times
Been thanked: 3 times
Contact:

Re: GBZ Guide Part 3 is up!

Post by yves1984 » Wed May 11, 2016 12:17 am

wuhu great!
thx

3y3c0ugh
Posts: 16
Joined: Tue May 10, 2016 7:59 pm
Been thanked: 2 times
Contact:

Re: GBZ Guide Part 3 is up!

Post by 3y3c0ugh » Wed May 11, 2016 8:18 pm

For those people who have ordered a BW screen from Amazon, and got a blue board that looks like mine, this is how to wire it.

Image

5v Power (Red) Pin 1
GND (Black) Pin 2
AV 1 (Yellow) Pin 3
*AV 2 (White) Pin 4* [We aren't using a second AV input so this pin won't be necessary!]

So, to match up with wermy's video all you will need to do is solder the WHITE and BLACK wires to Pin 2 (GND). I just used the wire that came with the screen. (white wire had been in pin4 as AV2, and all were converted to a common ground before being split into 2 inputs and a d/c jack)
My Website Main Page | MAME Section of my Site | 3y3c0ugh's GBZ Experience

"There are only 10 types of people in the world: those who understand binary, and those who don't."

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest