GBZ Guide Part 3 is up!

[wermy]

Just posted.
https://www.youtube.com/watch?v=sbLAoOCit5k
Written part:
http://sudomod.com/game-boy-zero-guide-part-3/

[hummerh1]

Great tutorial wermy! You are awesome!

[Retrohead95]

Just posted.
https://www.youtube.com/watch?v=sbLAoOCit5k
Written part:
http://sudomod.com/game-boy-zero-guide-part-3/

Loved the guide @wermy. Your soldering iron makes soldering look effortless and gets the job done in a breeze. Would you mind sharing what soldering iron, solder and soldering tools you're using?

[ktechelonbreak]

Thank you for the guide wermy. I was wondering how I'd end up getthing those screw posts in. No Epoxy on hand or the metal bracket, time to take a trip to the store!

[choochootrain23]

Awesome!

[Thatbraziliann]

Is anyone using the nice shopping display? does the red and white cables go in the same place @wermy set his in?

[yves1984]

wuhu great!
thx

[3y3c0ugh]

For those people who have ordered a BW screen from Amazon, and got a blue board that looks like mine, this is how to wire it.



5v Power (Red) Pin 1
GND (Black) Pin 2
AV 1 (Yellow) Pin 3
*AV 2 (White) Pin 4* [We aren't using a second AV input so this pin won't be necessary!]

So, to match up with wermy's video all you will need to do is solder the WHITE and BLACK wires to Pin 2 (GND). I just used the wire that came with the screen. (white wire had been in pin4 as AV2, and all were converted to a common ground before being split into 2 inputs and a d/c jack)