Just playing zelda and I've just realised I don't know how to save, I did a google search and it's says to press right trigger and select. But when I try that I goes to slow motion?
Thanks sam
How to save on retropie
-
- Posts: 392
- Joined: Thu Jun 09, 2016 4:17 am
- Location: uk
- Has thanked: 76 times
- Been thanked: 51 times
Re: How to save on retropie
Select and X, then will bring up a menu, whatever top option (not got it here too check) is click that then scroll down to save.
To load is as above but under the save option is a load tab.
To load is as above but under the save option is a load tab.
Check out my modding and repair channel of retro and modern consoles:
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
-
- Posts: 51
- Joined: Sat Aug 06, 2016 6:30 am
- Has thanked: 20 times
- Been thanked: 14 times
Re: How to save on retropie
@Sam_shep What controller are you using?
Standard save states in emulators for NES, SNES, and Playstation are as below. I have seen video comments of others not being able to get save states to work, but I do not know if they solved the issue. I just wanted to confirm the below is pretty common way of saving in Retro Pie.
Save State: Hold [right trigger] then press [Select] (Trying to hit them both at the same time at times may not work).
Load State: Hold [left trigger] then press [Select]
You can save to and load from multiple save slots.
To Select a Different Slot to save to: Hold [Select] then press [right] on the D-pad. This will scroll you through Save State 1, 2, 3, etc.
To load a Different Slot: do the step above and choose you save slot. Then do the "Load State" process above.
Standard save states in emulators for NES, SNES, and Playstation are as below. I have seen video comments of others not being able to get save states to work, but I do not know if they solved the issue. I just wanted to confirm the below is pretty common way of saving in Retro Pie.
Save State: Hold [right trigger] then press [Select] (Trying to hit them both at the same time at times may not work).
Load State: Hold [left trigger] then press [Select]
You can save to and load from multiple save slots.
To Select a Different Slot to save to: Hold [Select] then press [right] on the D-pad. This will scroll you through Save State 1, 2, 3, etc.
To load a Different Slot: do the step above and choose you save slot. Then do the "Load State" process above.
-
- Posts: 219
- Joined: Wed Nov 16, 2016 3:04 am
- Location: UK
- Has thanked: 3 times
- Been thanked: 73 times
Re: How to save on retropie
If you go onto retroarch settings you can select you hotkey input to what you want then save the configuration before you leave
Who is online
Users browsing this forum: No registered users and 1 guest