Better sound, better speaker

General GBZ-related chat goes here. Share ideas, tips and tricks, or ask questions that don't fit into the hardware/software help forums.
User avatar
ABH
Posts: 188
Joined: Sat May 28, 2016 7:01 pm
Location: Qatar
Has thanked: 82 times
Been thanked: 113 times

Re: Better sound, better speaker

Post by ABH » Wed Oct 05, 2016 1:04 am

Ganreizu wrote:
ABH wrote:All AIO boards are same sizes :)
Keep trying .
FullSizeRender.jpg
I don't understand D:

The analog stick pads are just way too in the way. I dremeled the case to hell and the speaker as far as i think i'm allowed. (Even more than in the pics)

[spoiler="pics"]IMG_1978.JPG

IMG_1977.JPG[/spoiler]
Cut those
[spoiler="1"]
1.jpg
1.jpg (2.45 MiB) Viewed 10127 times
[/spoiler]
And tried with the case little bit
[spoiler="2"]
FullSizeRender.jpg
FullSizeRender.jpg (2.2 MiB) Viewed 10127 times
[/spoiler]

User avatar
Captn.Rob
Posts: 9
Joined: Thu Sep 15, 2016 2:32 pm
Has thanked: 6 times
Been thanked: 1 time

Re: Better sound, better speaker

Post by Captn.Rob » Wed Oct 05, 2016 2:27 am

Hm, any idea where i can find the CE32A-4 in europe?
The US-eBay shipping costs would be too high for me :/

User avatar
CaptainDurden
Posts: 133
Joined: Wed Sep 07, 2016 1:24 pm
Has thanked: 70 times
Been thanked: 48 times

Re: Better sound, better speaker

Post by CaptainDurden » Wed Oct 05, 2016 3:46 am

Captn.Rob wrote:Hm, any idea where i can find the CE32A-4 in europe?
The US-eBay shipping costs would be too high for me :/
you can't. believe me I tried. settle on the visaton instead.
Helder wrote:People spend so much time in asking questions and no time looking for an answer that is available.

User avatar
Captn.Rob
Posts: 9
Joined: Thu Sep 15, 2016 2:32 pm
Has thanked: 6 times
Been thanked: 1 time

Re: Better sound, better speaker

Post by Captn.Rob » Wed Oct 05, 2016 4:24 am

I'm curious if the visaton would fit in the case with all of wermys "custom parts" in addition to helders AIO 2.0 board.
Thats what i am building right now, but i still have to wait for a lot of parts to see if it would fit.

User avatar
Ganreizu
Posts: 552
Joined: Thu May 05, 2016 8:20 am
Has thanked: 168 times
Been thanked: 97 times

Re: Better sound, better speaker

Post by Ganreizu » Wed Oct 05, 2016 7:12 am

ABH wrote:Cut those
[spoiler="1"]1.jpg[/spoiler]
And tried with the case little bit
But don't separate it from connecting the rubber/paper piece from the base right? I cut those notches more but i can go further. I cut down the edge of the case too.

If i can't get it tonight then i will wire up the adafruit speaker to see if i'm satisfied with it's audio. Worst comes to worse and i'll have to dremel off the joystick pads and reprogram the AIO just to get the speaker to fit.

Treguard
Posts: 128
Joined: Thu Jul 28, 2016 5:29 am
Has thanked: 40 times
Been thanked: 6 times

Re: Better sound, better speaker

Post by Treguard » Thu Jan 05, 2017 6:59 am

Captn.Rob wrote:I'm curious if the visaton would fit in the case with all of wermys "custom parts" in addition to helders AIO 2.0 board.
Thats what i am building right now, but i still have to wait for a lot of parts to see if it would fit.
I'm struggling to get my aio board in. Stupidly i'd already glued the speaker down so starting with a fresh case as I'd buggered a few things up. Hoping i can get the speaker out of the current case and test it somehow

User avatar
Captn.Rob
Posts: 9
Joined: Thu Sep 15, 2016 2:32 pm
Has thanked: 6 times
Been thanked: 1 time

Re: Better sound, better speaker

Post by Captn.Rob » Fri Jan 27, 2017 5:05 am

Treguard wrote: I'm struggling to get my aio board in. Stupidly i'd already glued the speaker down so starting with a fresh case as I'd buggered a few things up. Hoping i can get the speaker out of the current case and test it somehow
Do you have any news, if the space is enough for the Visaton and helders AIO 2.0 board?

Treguard
Posts: 128
Joined: Thu Jul 28, 2016 5:29 am
Has thanked: 40 times
Been thanked: 6 times

Re: Better sound, better speaker

Post by Treguard » Fri Jan 27, 2017 11:47 am

Hi not without modification. I buggered up as I'd stupidly glued the speaker down when i was using just a controller board. The AIO board might just fit in, but you'd need to trim the bits around the speaker and then most likely a chunk of tje speaker well too.

Unless someone else advises otherwise, me personally I'd stay away and find a speaker with a low profile.

User avatar
Marty33
Posts: 145
Joined: Wed Feb 22, 2017 4:55 pm
Has thanked: 19 times
Been thanked: 13 times

Re: Better sound, better speaker

Post by Marty33 » Wed Mar 29, 2017 4:47 pm

Any news of this project ?

Any members use better speaker ?

Valadone
Posts: 53
Joined: Tue Feb 07, 2017 12:39 pm
Has thanked: 8 times
Been thanked: 5 times

Re: Better sound, better speaker

Post by Valadone » Thu Mar 30, 2017 2:06 pm

Someone did a youtube video to hear the difference between the 2 speakers ?

Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest